2. analog
  3. 124749-22604

I'm happy but I want more, more, more

My system is a Clearaudio Performance SE table, Clearaudio Stradivari cartridge, ARC PH5, Conrad Johnson et3 se pre, and a Classe CA-2200 amp running a pair of Thiel 3.6. Speaker cables are Cardas Golden Cross and interconnects are Cardas Clear Refection. Now, to upgrade the pre to a Conrad Johnson ACT 2 series 2 or an ARC Ref 3 will cost me about $3500-4000 CAD, as will an upgrade to a ARC PH-8 phonostage. Any opinions regarding which upgrade, pre or phonostage, will yield the greatest jump in performance are appreciated. BTW, no talk about upgrading speakers and leaving Thiel as that costs real money and countless therapy sessions.
bill10907
tooblue
1,934 posts
 
If you are just running a turntable as your source, I see no mention of a digital front end, then I would upgrade the phono stage but if you have a digital front end or plan on adding one then the preamp would be my upgrade option. I have always felt that the preamp is the most important piece of the audio chain other than maybe the speakers and you seem to be happy there.
totem395
390 posts
 
If you have not yet put a reasonable effort into room treatment
this is the place to start.
Considering it's cost to benefit ratio, its a no brainier.

 
bill10907 OP
14 posts
 
Tooblue. It's an analogue system only. Every time I've upgrade I am astounded by the amount of music on the record that I didn't get before I upgraded. In my mind, there is always a little bit more music than you previously thought. I agree, phonostage should be the direction. For some strange reason, it wasn't that clear to me until I read your post, but when I compare the prices of my existing preamp and phonosage, the choice is obvious. And yes, price is generally a good reflection of performance.Thanks.
Totem395. I'm just getting into room treatment. It's generally one of the last thing we audiophiles do, albeit for a number of good reasons, but the improvement from just 4 DIY sound absorbers makes me think I should have done it when I first started out 10 years ago. It is absolutely a no brainer!
anwar
119 posts
 
Do you already have AC power conditioner? My experience after adding Torus Power products (AVR30 WM for main system, RM8 and RM16 for another 2 systems) resulted in less background noise and the sound becomes higher resolution.
barbapapa
244 posts
 
anwar,
I replace a Bybee Holographic by Torus AVR16  (europe) without regret much better in many ways.
More to discover