2. cables
  3. 124767-9953

1 pair of good interconnects- which 2 components should I use them on?

Hi all,
I just picked up a set of 3' BlueJean LC-1 interconnects, which are much nicer than the others I currently have. Im wondering if they would be most valuable used between the phono preamp (Cambridge Azur 551p)---->tube Preamp (Cary AE-3) or should they be used to go from the Cary preamp---->McIntosh 2125 amp?

maybe this is a stupid question, but 2 fundamental things I know are that interconnects matter in the acoustic output, and also the signal output from a Cambridge phono stage vs Cary tube preamp are not the same. So with those things in mind I figured placing the interconnects in one spot vs. the other would matter based on the different output signals of each device.

I could listen to both configurations for a while and eventually gauge if I hear any difference (which probably won't be the case), but I wanted to see if there is a "right answer" first :) 

thanks for any feedback!
hockey4496
geoffkait's avatar
geoffkait
23,365 posts
 
czarivey
2,780 posts
05-19-2016 2:34pm
"I’m professional and use $30 ICs and happy with performance.
Used to have higher-priced AudioQuest, JPS labs and MIT, but figured price of interconnect or any wire isn’t factor of quality of performance but rather fashion or cult."

Hey, I got that beat. I'm a professional and don't use interconnects at all.  I don't use power cords either.  
mofimadness's avatar
mofimadness
4,994 posts
 
Al has to be the most reasonably mannered & comprehensive contributers!

+ 1...Al’s the best.  I'm so glad we have him.

IMHO and in my many, many travels though the high-end world, I have found the preamp to amp link to be the most critical, but I do understand the source side of things too.

As Al so adeptly said " there is no right answer that can be predicted with any kind of certainty".
jafant's avatar
jafant
19,844 posts
 
Ditch the BJ cables and buy better. Then place the IC on your source 1st!
hockey4496 OP
104 posts
 
Lol, ditch the cables that I just invested in with the little $$ I have for equipment?if I were to ditch anything it would be the record weight made from a pendulum, circular saw bit, and housing of a keg tap :)

Thanks everyone for the feedback. If you have suggestions for the next pair I upgrade to I welcome them, but I don't intend on spending more than $60 tops
lowrider57's avatar
lowrider57
5,417 posts
 
You don’t need to spend a lot for quality ICs. Try Signal Cables "Analog Two" interconnects for $55/pr. They will be a real upgrade to your system.
Money back guarantee.
More to discover