FR64s & Orsonic Av-1s Effective mass ?


Hi Good folks!

I have an FR 64s with original headshell. Have ordered an Orsonic Av-1s/ 10 grams, to meet better compliance/ resonnance matching with higher compliance cartridges.

Any idea what the effective mass will be with this combination?

Would be funny to try for example how my London Decca Super Gold would work with this arm..😀


geddyen
Dear @gddyen: With its own headshell the tonearm EM is 35grs. You just have to weigh the FR headshell and the diference with the Orsonic is what you have to add/ subtract to that 35 figure and you will be around the EM data you are looking for.

Regards and enjoy the music,
R.




Hi lewm

I have already tried the combo, original fr64s/ Decca Super Gold, and it is playing music in a way.
Vinylengine calculator with fr64s original headshell ( 35 EM) says around 7.5 hz. I am also using the " Decca pod" that adds maybe 5 grams. ( Do not have an accurate weight here that exceeds 5 grams now).
But when I tried the arm/ cartridge compability track at Hifi news test record the cartridge jumped straight into the next track:)
About the resonance track on Hifi news test record, I read somewhere that the results/ cutting actually is wrong!?
I also have an Ortofon test record I can try on later..
Your trick / calculate formula seems interresting. But if it is as easy as Raulirugas is saying...?
Hi Rauliruegas

Original fr64s headshell FRS-3 as far as I know weighs 20.6 gr.
Orsonic AV1-s weights 10 gr.

Difference: 10.6 gr.

Meaning EM clocking in at 24,4 gr?

Resonance frequency 8.8 hz
Thats a green light 👍

I don't know where to begin.   If VE says that the OEM FR64S + its OEM headshell have together an effective mass of 35g, that's a good place to start.  Then you have to add the weight of the cartridge and the screws and nuts used to hold the cartridge in place.  But you'd like to know the weight of the OEM headshell separately, so as to be able to compare it to the weight of the Orsonic, like Raul says.  And even then, the change in EM is not the same as the difference in static weight of the two objects.  (I don't know what a Decca pod is.  Perhaps it's something that goes between the headshell and the cartridge.  If so, the pod plus Orsonic might be close to the same weight as the OEM FR headshell.  The difference would be negligible, IMO.)  If it sounds good, especially in the low bass region, it probably IS good. If the calculated resonant frequency is 7.5Hz, that is not so bad either.  You might look here for some help: http://www.resfreq.com/resonancecalculator.html
This is a Decca pod:

https://www.divineaudio.co.uk/fit-deccapod-recalibrate-service-for-london-decca-cartridges