2. speakers
  3. 124813-818

Raidho speaker owners, what solid state amplifier do you use?

There seems to be consensus SS amps in general are better match for Raidho speakers than tube amps. I'm using 200 watt Bob Carver tube monoblock amps with my D2 to great effect, but I'm interested in getting a SS amp (less than 8k new or used).  The Soluution, Constellation, etc are way too overpriced IMO.  Any experiences with less costly offerings?  I am looking into the new Yamaha top of the line integrated, AS3000, which is 7k retail.  It's rated 100 watt at 8 ohm and 150 at 4 ohms and is built like a tank with substantial power supply (over 50 lbs).  This is the way Yamaha used to build their top amps decades ago before they went cheap mass market. 
dracule1
gocubs999
156 posts
 
"Thanks for reminding me of the Rowland. I'll have to check it out. There seems to be some consensus that Raidho's like Class D amps with very high dampening factor".

If this is true regarding Raidho (I have only heard the D1's at shows- very impressed), the Rowland M312 would seem to be a good match. It drives my Avalon Indra's superbly. Draws little energy in standby mode and remains cool to touch..not with my hands.
xti16
1,525 posts
 
Lars K from Raidho had JR for his amp(s) before the Aavik was released. Raidho also used a lot of Rowland amps in their shows (again pre Aavik). Other Raidho owners from AS who had Pass Labs thought they slow sounding too and replaced them. Pass makes a great amp but not a real good match for the Ho's. Tyler will be getting the Aavik pre/pro which is class A. It will be interesting to hear the difference between the class A and D Aavik.
dracule1 OP
1,085 posts
 
I remember now. I did hear JR gear with the C1.1 several years ago. It sounded smooth and nonfatiguing but was also a little dry sounding. Overall a good match, but I like the luscious wet sound some tube amps can produce. 
phusis's avatar
phusis
1,244 posts
 
Lars Kristensen has spoken warmly of the Naim Nait being a lovely match with the Raidho's. 
dracule1 OP
1,085 posts
 
Hi Phusis, I believe Michael Borrenson, designer of Rhaido speakers, used the NAIM Nait before moving on to ultra expensive Soluution gear.  I've also heard from a Raidho dealer who really likes the Supernait with Raidho.
More to discover