Setting SRA on Rega?

Was the SRA ok when the cartridge was first installed but has now changed? Have you just noticed that the SRA is off, but the VTA looks ok? Sometimes you have to make a bit of a compromise between the two.

A little more info would be helpful.

If I have to be honest I discover sra just recently. Before the only thing I knew was that the arm should be parallel to the record; so, two years ago when I fitted the cart I didn't check for sra. But from what I recall the stylus and the cantilever angle never changed through time. The cantilever though always seems to me to ride a bit too low, whit the tail of the cartridge almost touching the record. When I lower the stylus on the record the cantilever go a bit down, dunno if it's normal or if it should maintein his position.. any input from dv 20x2 owner would be very appreciated on this matter.

"The cantilever though always seems to me to ride a bit too low, whit the tail of the cartridge almost touching the record"


That IS way to low , raise the back of the tonearm more. Dynavector 20x2 has a very stiff cantilever so if the suspension is good the back of the cart should  not be riding so close to the record. A more forward rake will improve sound a lot!!

Matt M