Creating space between interconnects & keeping cables off the floor


I strongly doubt this is an original idea, but since I came across it on my own, I thought I would share it and solicit the opinions of fellow Audiogoners. Conventional audio wisdom seems to be that power cables should be elevated off the floor and interconnects should not interconnect with one another (i.e., cross)  if at all possible. If you have a minimalist system, that may not be a major problem. But if you have a lot of separates and only a narrow space behind your racks to accommodate all the connections, it can become a real problem, as it was for me. Various companies offer various (but generally expensive... and not always effective)  solutions for this. For instance, since I use mostly Shunyata power cords and conditioners, my first instinct was to try their Dark Field Mini separators for the web of interconnects behind my system. While these may work as advertised for the thicker and heavier interconnects that Shunyata makes, they were useless on my thinner, but beloved Nordost interconnects, which lacked the weight and the mass to keep the Minis from falling to the floor. Ditto with my Ocos speaker cables. Short of redesigning my entire system, I didn't know what I could could about it until, one day, while walking down the wrong aisle at CVS in search of dental floss, I came across packages of wooden clothes pins. Forgetting all about the dental floss, I bought them on an impulse, took them home, and discovered they make stable lifters and separators for normal width cables. They attach easily to my speaker cables and, spaced about 3 or 4 feet apart, keep them about 3 inches off the floor. If you use them to separate interconnects behind your system -- with the grip end around one cable and the other cable sandwiched between the handle end, the separation is about 1.5 inches... A really cheap, easy and, as far as I can tell, effective way to help tame the tangled web of wires behind one's system. But I'd be interested in what others who have tried this have to say about it. Thanks
mross1949
This gives me a thought for yet another thread... The most outlandish things you've ever done or thought of for isolating your system components?

At one time, I had thought of drilling three/four holes through my floor for large threaded rods that would be sunk into the ground below, up through the floor, where the rods would be surrounded by rubber grommets at floor level for a seal, that would support a platform for my amp.

As you can see, no WAF here!
I remember reading, years ago, Bob Ludwig's Gateway Mastering facility... he had holes dug deep into the ground filled with concrete that were the supports for his Eggleston Works speakers. Those pillars were not tied into the concrete (floor) slab.
Thought I would toss in my 2 cent opinion. One day the wife and I were listening, and I picked a power cord up, and she said hey what did you do? I picked up a power cord off a cable riser no less. I did it again, then she did it for me, I could not believe what I heard. After giving it some thought, like a lot of you guys did, I came up with 5
ceiling hooks, 5 s hooks, and a roll of 20lb fishing line. I wound up suspending 6 power cables, 4 IC's, and a pair of speaker cables.
The finished project resulted in of the biggest changes in our system bar none, and it cost under 10 dollars! Better deeper more defined bass, overall sound more relaxed or organic, and believe it or not,
another layer of hidden information revealed! As far as looks ours
was laid out symmetrical, and looks pretty cool, the wife thinks so too. All I can say is hanging all cables is a must! 
I find it cool that you always refer to your system as yours. You and your wife. You are one lucky guy!

I already have hooks in my ceiling from years of listening to  various acoustic panels. So, I'm not afraid of this sort of thing.