Tube dampeners on ARC gear ... FREE TWEAK


Here's a cheap (free) tweak for owners of ARC gear using the black tube dampeners. If you move both dampeners as far up toward the top of the tube as possible without having the top one fall off, taking care that both dampeners are solidly touching each other, you will get better dynamics, bass, mids, highs and a lower noise floor. Try it ... you'll like it.
128x128oregonpapa
OP

I put mine on both close to the top but not touching.  I have heard microphonic effects in the sound from time to time in the past with no dampers on and this seems to solve the problem though I am sure there are other ways as well. 

I think GK mentioned liking the Herbies dampers if I recall correctly.   Don't recall why.
^^^ Mapman ...

Those Herbies dampeners look interesting.  

Warren Gehl at ARC suggested that the two rings be pressed together and placed about 1/8th inch from the top of the tubes. No gap between the rings. It made a big overall improvement in my ARC electronics ... not subtle at all. 
Oregonpapa wrote,

"geoffkait ...

If the stock tube rings from ARC "suck," why is there such an improvement with them in the proper placement, and why the degradation of the sound when they are totally removed from the tubes?"

I was was referring to generic elastomer rings, never tried the ARC tube rings. I guess they're what you call an exception. There's an exception to every rule.  ;-)


OP next time I open that sucker up I will check the dampers and try that.

I last dabbled with them quite a ways back. Its possible they are set up as you describe already but not sure. I know they are at the top not far apart but not sure if actually touching. Could be....

Revisiting this "tweak",
I decided to go back in to my preamp and do some experimentation with dampers and pulled off the ARC elastomer rings, and replaced them with some original herbies teflon halo's that  I had in a baggie, in the audio"junk drawer". I placed them in the same spot, (high up as the stock ARC rings were as suggested by oregonpapa). To my surprise, they did in fact bring a sweeter sound, and brought a greater sense of bloom to the instruments, without adding any muddiness.  

The ARC rings sound constricted by comparison and almost give, dare I say "nervous" kind of presentation. The herbies brought a very relaxed sound, with an added sense of ease and weight to the sound. I believe the rings have something to do with the ARC gear having that solid state kind of presentation.  I also feel like the Highes are cleaner and less bright than before.

 Now mind you, these are the original halos, and not the current top of the line herbies dampers.  I'm impressed so far. I will leave them in for a while and listen to more material to really see what they are doing.  I do like the increase in bloom for sure. I think the rings constrict the bloom IMHO.