Integrated Match to Focal Spora No. 2

I would expect whatever Dealer you choose should offer a modest (10%) discount provided you've got a good relationship with them on past purchases. 
These speakers are HOT right now and selling quite well so don't expect huge discounts this soon. 
There is a used pair in black on AG right now for a great price. The owner is selling them to purchase the Sopra 3. 

Hi Toneranger,

I’ve done a lot of analysis on older Focal crossovers. They were "discerning" only due to a gimmicked crossover which reduced the minimum impedance by about 2 Ohms. I can’t tell if the Sopra is gimmicked the same way or not, but the impedance curve sure looks familiar. If it is, in the crossover you’ll find 2 large electrolytic caps, that go to 4 power resistors each in the bass. Remove the smaller of the two caps and they become very easy to drive, with almost no change to the frequency response or phase matching.

Erik, I've searched extensively for info on Focal X-Over's with little success. Any info you've got would be appreciated before I discect my Sopras to see what's inside. 
I don't seem to have any difficulty with their impedance using my 700i amp. It barely gets warm driving them to 93db peaks in my room. 

Anyone with Sopra's remove the tweeter cover yet?  I'm waiting until I get everything dialed in before I try removing them on my Sopra2's. 

Hi Stevizzy!

I've not looked at the Sopra crossovers, but the curve looks familiar to me. Take a look at this analysis for the Focal Profile crossover. Scroll down to "Bogus Woofer Cap" and look at the schematic there.  See if you have something similar. 

You may not! :) but if you find an array or two of power resistors, my guess is the same kind of trickery is going on.

Best,


Erik