2. cables
  3. 1335297906

High Fidelity Cables CT-1designed by Rick Schultz

In December 2011,I wrote that High Fidelity cables led by cable designer Rick Schultz was putting together a new cable.The cable came to market as CT-1.The CT-1 has FINALLY made it into my system!I had obtained a version of the prototype that Rick had been working on.It blew my previous reference Genesis by Virtual Dynamics.I thought I had finally found my end with this cable.This prototype delivered to my ears "Nirvana".Could I be at the end of my quest for the ultimate sound?
No. I received two pairs of CT-1 to replace my prototypes.They went into the system this past Friday.Unable to dedicate time until Sunday listening,I stole a few moments,ducking away from company with anticipation.My guest could tell even with the music set for"ambiance"something was intriguing and I was in for a treat!
The experience:
First off,CT-1 was very user friendly.Installation was simple;the cable is very nice and light.The female RCA fit beautifully unlike any I had found in other cable.It was secure and reliable.It seemed much thought was dedicated to developing a designer fit to an aesthetically stunning RCA connector.Install entailed a few wiggles to ensure what seemed like a compression fit on my RCA.
It was 2-3 hrs. for the 1st step of break in to be complete.At that point I had something different!Today,although they only have 10-12 hrs. on them,I can`t put into words how much my system has transformed.Believe me,I loved my prototypes.However....there is simply no comparision.
The clarity and sound is so natural.
The soundstage is like nothing I ever heard.Resoulution is breathtaking and inner detail is simply hard to believe possible.
The sound has transended and now it simply does not seem as thought I have speakers.
My system is musicians playing music.
I am told with time they will improve and I trust that as it was revealed with the prototypes.I wanted to share my thoughts with you that now.
Unequivocally,a testament to High Fidelity,as the name declares.
High Fidelity Cables for me,the last word on it,after 12 hours!
Truly Amazing

Al
alpass
ozzy's avatar
ozzy
7,517 posts
 

Well I am convinced that the best approach is still to load up the MC-05’s at the wall outlet than at the P-10. The sound is much purer and the video is the sharpest and with a much more natural appearance.

Funny, I thought that placing the MC-05's at the P10 it would have been closer to the source, but no, keep them at the wall!

tbg
5,263 posts
 
Ozzy, as so often happens to me on AudioGon, I lost what I had written, so I will jump to the case. I tried several power strips that would allow me to plug directly into the wall plug. The HFC MC-6 proved better than a SR Quantum Line Source that is Tesla Coil treated. But putting Star Sound Audio Points under both really improved the sound but more so the MC-6.

There are just too many remaining questions about the MC 0.5s to go. Is there any limit how many will improve the sound. I know Rick took 17 to the Chicago show. I guess I could use my two SR QLSs to add 15 more. Not any time soon, however.
hifial's avatar
hifial
332 posts
 
Pete , I spoke to Rick today about how you had the Hemisphere plugged into the P10 and have now plugged it straight into the wall.

I asked him how many hours would it need to reach its optimum now that it is plugged into the wall.

He said it is like it is starting over, like new kind of. He said at a minimum it would need 200 hours but it will still change noticeably for another 200 hours. And then from there it would change in subtle ways for another 200-400 hours.

He said to give it at least 200 hours before you make any decisions.

The reason for this is not just the Hemisphere its self but the whole system having it remap the previous magnetic conduction of the system.

I hope this helps. 

I also found out why the Hemisphere is "10amp", NOT.

But I will tell in another post, when I am not ready for bed.  
68pete
1,004 posts
 
hifial
Thanks you for the info. High Fidelity products have lifted my system to the next level and  beyond,  so giving the Hemisphere more time will not be a problem. I will report down the road as the changes happen. 

rlawry
484 posts
 
I have not yet reached a limit on MC-0.5 Waveguides when plugging them into an unused outlet which also feeds my HFC URH power conditioner.  At one point I had just one waveguide plugged into this port and 5 plugged into the power conditioner outlets, but found that they are more effective in parallel with the conditioner than when plugged into the conditioner outlets.  I now use a 2 ft long power block, into which I have a starfish-shaped 5 outlet splitter, into which I have a 1-to-3 angled outlet splitter, for a total of 7 waveguides.  When I first tried this the music initially sounded "small" and un-dynamic but quickly expanded after a few minutes' use.  I will probably add some more 1-to-3 angled splitters and more waveguides to the starfish splitter. 
More to discover