2. cables
  3. 1335297906

High Fidelity Cables CT-1designed by Rick Schultz

In December 2011,I wrote that High Fidelity cables led by cable designer Rick Schultz was putting together a new cable.The cable came to market as CT-1.The CT-1 has FINALLY made it into my system!I had obtained a version of the prototype that Rick had been working on.It blew my previous reference Genesis by Virtual Dynamics.I thought I had finally found my end with this cable.This prototype delivered to my ears "Nirvana".Could I be at the end of my quest for the ultimate sound?
No. I received two pairs of CT-1 to replace my prototypes.They went into the system this past Friday.Unable to dedicate time until Sunday listening,I stole a few moments,ducking away from company with anticipation.My guest could tell even with the music set for"ambiance"something was intriguing and I was in for a treat!
The experience:
First off,CT-1 was very user friendly.Installation was simple;the cable is very nice and light.The female RCA fit beautifully unlike any I had found in other cable.It was secure and reliable.It seemed much thought was dedicated to developing a designer fit to an aesthetically stunning RCA connector.Install entailed a few wiggles to ensure what seemed like a compression fit on my RCA.
It was 2-3 hrs. for the 1st step of break in to be complete.At that point I had something different!Today,although they only have 10-12 hrs. on them,I can`t put into words how much my system has transformed.Believe me,I loved my prototypes.However....there is simply no comparision.
The clarity and sound is so natural.
The soundstage is like nothing I ever heard.Resoulution is breathtaking and inner detail is simply hard to believe possible.
The sound has transended and now it simply does not seem as thought I have speakers.
My system is musicians playing music.
I am told with time they will improve and I trust that as it was revealed with the prototypes.I wanted to share my thoughts with you that now.
Unequivocally,a testament to High Fidelity,as the name declares.
High Fidelity Cables for me,the last word on it,after 12 hours!
Truly Amazing

Al
alpass
68pete
995 posts
 
hifial
Thanks you for the info. High Fidelity products have lifted my system to the next level and  beyond,  so giving the Hemisphere more time will not be a problem. I will report down the road as the changes happen. 

rlawry
477 posts
 
I have not yet reached a limit on MC-0.5 Waveguides when plugging them into an unused outlet which also feeds my HFC URH power conditioner.  At one point I had just one waveguide plugged into this port and 5 plugged into the power conditioner outlets, but found that they are more effective in parallel with the conditioner than when plugged into the conditioner outlets.  I now use a 2 ft long power block, into which I have a starfish-shaped 5 outlet splitter, into which I have a 1-to-3 angled outlet splitter, for a total of 7 waveguides.  When I first tried this the music initially sounded "small" and un-dynamic but quickly expanded after a few minutes' use.  I will probably add some more 1-to-3 angled splitters and more waveguides to the starfish splitter. 
jay23
210 posts
 
hifial:

I understand what the website says, but the UR Helix products use the CT-1 Ultimate Reference Wave Guide. It seems they modify a Wave Guide with the Helix technology/magnets.

From the Ultimate Reference Helix Power Conditioner page, "Eight outlets magnetically connected point-to-point in series with three ultimate reference-level waveguides using our most powerful helix array of spherical magnets inside." 

So it is likely the Hemisphere uses either the CT-1 Enhanced or Ultimate module. I'm just wondering if someone knows for sure, or has peaked inside, if it is openable.
lak's avatar
Ag insider logo xs@2x
lak
4,580 posts
 
@hifial;
What's the rest of the story regarding the Hemisphere?
hifial's avatar
hifial
332 posts
 
jay23, I think you might be misconstruing what is on the web site.
However when I talk to Rick I will ask him if he can clarify a bit.

Now, let me see if I can explain about the 10amp "limit" NOT, on the Hemisphere.

There is NO current restriction on the Hemisphere based on its design. It is because of UL requirements that are part of the IEC inlet that is rated as 10amp. This is the same one used by many other Audio OEM but many can and do ignore the fact that it is UL 10 amp.

Now, that does not mean that the Hemisphere is only capable of handling 10amp. Rick said it can easily handle 15amp (and more) but he 1) does not feel comfortable saying that when the UL does not rate it that and 2) he is looking to have the Hemisphere UL rated and they will not give it a 15 because of the IEC that is UL at 10.

Also Rick said that the 10amp IEC can also easily handle 15amp.

So, he told me that anyone should not worry about that 10amp.

He also told me there is a fail safe system (passive that can reset itself) in the Hemisphere in case of an overload but that the wires in your home would fail before the Hemisphere would.
And it is NOT in the direct power path so it will NOT effect current.

NO, do NOT ask. I can NOT explain or tell in any way shape or form.

At this time it is TOP SECRET.
More to discover