Advice on what preamp to select.


Hello
I picked up two Adcom GFA565 Power Amps recently and would like to get a newer preamp to go with these.  Currently have a Crown IC150.  Have found a Audio Research SP-9 MKII for about $1100 but am considering also the following: Macintosh C series in the range of the 34V or newer, or purchasing a Mac MX series preamp.
The MX 130 looks to have decent reviews just being used as a solid preamp for stereo use and has a phono section which I need.  I know this is a question with no best answer but anyone have experience that they are willing to share?
Thanks
Kent
torchlake99
thanks all for your input. Like the Vincent but would need a phono section .
What do you think about the Conrad Johnson PV-7?
Have an AR SP9 upgraded past a MK111. The phono is very good. So @ $1100 good value and get it upgraded further down the track if you have a good tech.

Seeing Vincent mentioned, the best Pre-Amp I own and have heard for the money is the Vincent SA-T8. Competes with or bests Pre's costing much,much more. Above your budget and line level only.
A used Audible illusions 3a would fit your needs nicely. It has 1600ohms output impedance however. What is input impedance of your monos? 
copied this from review  on the amp

The Adcom's input impedance at 1kHz was 47k ohms, and its output impedance was uniformly low—ranging from 0.02 ohms from the bass to the upper midrange and increasing slightly to 0.03 ohms at 20kHz. The gain of the GFA-565 was 27.1dB into the unbalanced inputs. I found that the three gain settings on the balanced inputs—0dB, +4dB, and +6dB—actually gave quite different readings. The +4dB setting was actually 8dB down from the 0dB, the +6dB setting was down 14dB from the 0dB. Unweighted noise was 70dB below 1W into 8 ohms
Read more at http://www.stereophile.com/content/adcom-gfa-565-monoblock-power-amplifier-measurements#o0IIiIqQ6YtF...