Taralabs cables

Introducing an all NEW cable by Taralab's,  as it turns out,  the new 0.3 has been discontinued , replaced by a much better performance cable in the continously revamped taralab's cable model line up,           
The Zero Prima w/HFX


The Zero Prima is a state-of-the-art analog interconnect cable using an all PTFE (Teflon) air-tube construction and a pair of helixed Rectangular Solid Core conductors. The extended Bandwidth technology is employed using a product design that has a perfect air-dielectric environment and minimal dielectric construction to extend the high-frequency bandwidth to provide a linear and uncompromising approach to the sound of the interface. A complex system of braided shielding made of pure copper and silver is used to control the RF and EMI interference. The shield is part of the ISM Shield System. ISM is the Isolated Shield Matrix, where the shield floats at both ends of the interconnect cable. The shield is connected at the source end, to the HFX Floating Ground Station. The Floating Ground Station uses Ceralex devices internally to absorb and dissipate RF and EMI interference in the shield. This is done outside the signal path, and so the Zero Prima Interconnect with an ‘out-board’ Floating Ground Station does not affect the high-frequency signal within the signal carrying conductors.
The Zero Prima with the Floating Ground Station is designed for component interface of all extreme high-end audio components, but not recommended for electronics that have limited filtering.

Well any pics of systems posted.  Good to see what people are running 

I am still looking to get together and listen to your system.

Keep me posted!

Calvinj,  pm me if you like to have pics of my system,  and all my other audio equipment 😆

The Zero Evolution Phono



The Zero Evolution Phono-Cable is the epitome of high-end reference quality phono cables. The design and technology used in creating this exceptional cable, is a far cry above any other phono cables that are currently available in today’s marketplace. Extremely low Capacitance as well as exceptional high-frequency extension The Zero Evolution Phono-Cable works very well with all cartridges regardless of voltage.The Zero Evolution also incorporates a “star-ground” system (SGS) with a variety of optional male/female mini-banana connections. This system is unrivalled in that it provides the option of floating or connecting different sections of The Zero GX Phono-Cable shielding system. There are subtle differences to be heard, some of which are caused by slight variations in the shield and grounding arrangements of the cartridge and the tonearm, and the turntable and the phono-preamp. As we all know, the shield/ground formats in the Phono interface are sometimes different enough to create a hum or buzz problem. Using The Zero Evolution Phono Cables’ superb proprietary shielding system, we are able to provide a method of optimizing the shield and ground system for the lowest possible noise floor in this critical component interface. As we all know, the shield/ground formats in the Phono interface are sometimes different enough to create a “hum or buzz” problem. With The Zero Evolution Phono Cables’ proprietary shielding system (SGS), we are able to provide a method of optimizing the shield and ground system for the lowest possible noise floor in this critical component interface.“Master” Gen3 Conductor is: 99.999999% Oxygen-free, mono-crystal, rectangular solid core, hand-polished, frequency-tuned copper conductor.Available termination: RCA, XLR, 5 pin DINHandcrafted in USA and lifetime guaranteedExcellent high-frequency extension & exceptional detailTight bass & full midrangeExtremely revealingImpressive holographic soundstageNeutral & naturalUnparalleled musicality