or for that matter any feedback on an Emotiva CMX-2 would be appreciated.
https://emotiva.com/products/accessories/cmx-2
https://emotiva.com/products/accessories/cmx-2
To Power Condition or Not to Power Condition?
or for that matter any feedback on an Emotiva CMX-2 would be appreciated. https://emotiva.com/products/accessories/cmx-2 |
Post removed |
With the exception of my Levinson amp which plugs directly into the outlet, I like the Naim Wiremold strip as well. Keep all the components on the same ground. Non current limiting. www.avoptions.com They carry updated Cryogenic treated products. Power strips, Power cables and outlets. All still endorsed by Naim Audio. N |
nutty, the standard 8 place Wiremold has worked well for years for me, but I wonder about the current limiting part. Yes, no limiting from geometry and lack of conditioning or switches in the line. But the Wiremold's fixed supply cable is 14AWG, and when I have 7 different pieces hooked up, with no less than five powered up and drawing some current at all times, I wonder about current limiting during intense passages. Hooking my receiver directly to the wall outlet and 10AWG dedicated supply line from the breaker seems to increase dynamics over running it through the Wiremold, even with the Venom Defender disengaged. Why I am interested in Shunyata set up with heavy duty strip and twenty amp rated supply "HC" cable. Even if I keep the receiver connected to the wall, peripherals might benefit from fatter pipe. Will investigate Wiremold's current offerings. |