Passives don't work nearly as well as active....If you insist, build one yourself.....all you need is a volume control, some wire, and box to put it in.
- ...
- 23 posts total
majorcHi, when you said in your first post affordable. I thought cheap but good. The Schiits volume control inside is every bit as good as other potentiometer based passives being presented here that are far more expensive. That’s what makes them a great buy, with a return policy. I also manufacture the LDR based passive the Lightspeed Attenuator which is maybe too expensive for you, and only one input. Second from the top in this link. https://forum.audiogon.com/topics/amps-preamps?tab=alltime And this is just one of the ebay line level rca switch box. http://www.ebay.com.au/itm/3-PORT-WAY-AUDIO-2-RCA-SWITCH-BOX-IN-OUT-MANUAL-SELECTOR-SPLITTER-/370853108342?hash=item5658915a76:g:e3kAAMXQb29R3-dX Cheers George |
I concur with the Mccormack Micro Line Drive preamp, own one and it is spectacular. The passive side provides dynamics like an active pre would deliver. The active side provides up to 12 db of gain and it is very good sounding as well. Steve's amps are designed to be used with passive preamps. I still own The Mccormack DNA-1 Rev B after all these years. |
Yes the McCormack Micro line drive is a great potentiometer based passive, with an active stage that can be switched in as well, if your source has low output voltage, <1v. Trouble is the active stage is just a Analog Devices AD712 dual-op-amp chip, not the best of audio opamps, that would be better replaced for dual OPA627's per channel on Browndog adapter boards. And I think it's only available s/h, long discontinued now. http://www.stereophile.com/solidpreamps/521/#jMEKhFqoSfSA6o7j.97 Cheers George |
- 23 posts total