SS to valve


I currently have GamuT M250i mono blocks but considering switching to valve mono blocks.
The M250i monos are amazing but I'm wondering what improvements could be had from comparatively priced valve monos...

The speakers are currently Tannoy DC10T & XP-20 pre.
Views from those who have made a similar transition are appreciated. 
128x128infection
Switching from s/s to tubes may not be a step up....  Modern day amps from both camps meet in the middle of sound expression.  Make sure the amp you buy is the one that pleases you most, after trying out others.
Manley Snappers mate quite well with Tannoys.  stringreen is right, I have Tannoy dc8 and am using  a solid state amp from Blue Circle.....it is very close to the middle especially with my tube preamp.  Best of luck in your search.  Regards.....

Although your Gamut is a great amp, it’s massive power ability is wasted on the Tannoy’s as they are very easy to drive.
Gamut specs:
Output power 8 ohm 1 x 250 watt
Output power 4 ohm 1 x 500 watt
Output power 2 ohm 1 x 900 watt
You would probably be better of with a good Class A amp like the smaller XA .8 series Pass Labs amps. Or if tube floats your boat, a good push pull triode mode amp. Maybe even a OTL like the Atmasphere S30 stereo or M60 monoblocks.

Cheers George
Thanks stringreen, carmenc & George. 

George could you further explain the benefits I would gain from using lower powered monos with the Tannoys?

Having only ever used SS I was unfamiliar with OTL amps & now I'm very interested...! How do the Atma-sphere M60 monos compare to the 300B monos from Transcendent Sound?
Are there any other manufacturers who produce good OTL amps?




Your Tannoys are are quite efficent at 92-93db, and with a benign 8ohm load, that’s why do don’t need a 250watt amp that can almost keep doubling it’s wattage all the way down to 2ohms. This is the type of amp that you would use on Wilson Alexias with their down to 1ohm at some bass frequencies loading.

By going less wattage you can get amps that are running much higher in Class A bias (which is better for sound) than the Gamunt can. The first watt is the most important so the more Class A watts you have the better the sound should be that’s why i suggested the smaller Pass XA .8 series.

As far as what I read with the Transcendent 300B OTL monos you only have 1.5watts?? Which sounds very low, With the Atmasphere M60 you get 60watts.
Maybe Ralph from Atmasphere will chime in, as knows his opposition and maybe he can explain what’s going on with the Transendent’s 1.5w

@atmasphere


Cheers George