How to merge my 2 Channel and HT Systems?

Moto Man

I have done this for years. I have the stereo outs from the processor go into a tube preamp. The tube preamp has two sets of outputs, one connected to the multichannel amp and one connected to tube mono blocks. The preamp is set to unity gain when listening to surround sound. When I listen to stereo you do have to switch speaker cables from the surround sound amp to the tube mono blocks and make sure the surround sound amp is turned off as my speakers do not have two sets of connectors. To some people this may be a pain in the rear but works for me.

I really do not have another choice as the room is too small to have two separate setups.

I've done it successfully. You will need to spend some money on a really good pre/pro that won't compromise the sound. Krell HTS 7.1 sounds really good as an analog pre-amp, so that's the route I went.

I looked up the Anthem Preamps and it looks as if they all have a loop through or unity gain so an external processor can be add and control the volume. As long as your intergrated A/V pro has either a line level output or you are using an A/V processor with seperate amps you should be fine. This would be easier if you include the MODEL numbers of all your equipment so manuals can be looked at.