Best Preamp - NO preamp... (?)


A few hours ago I decided to experiment and bypassed my highly regarded, excellent passive preamp and hooked up my PS Audio DSD DAC directly to the power amp.
There is no going back...
Every aspect of the sound has improved so dramatically that I'm simply blown away. I'm a bit shocked, playing CD after CD and I still can't believe it.
My phono stage has gain control as well, so it seems that from now on it will be disconnecting RCAs and plugging each in turn.
Since I usually do vinyl day or cd day (or week) anyway, the trouble seems totally worth it. Letting the cable settle in for a bit is not an issue.
Am I just crazy or are any of you doing the same?
Should I be concerned about damaging  the RCAs over time?
Thanks for your thoughts and experience. :-)
128x128ami
Tomcy6,
Agree! In theory "less parts" should equal better sound. In reality it doesn't always work out that way. Must be determined individually case by case.
An absolute "case closed" rarely if ever applies to audio/sound quality issues.
Charles,
For me... bypassing the preamp has always been my "sanity check" for what the preamp is really doing, or not doing for me.  I've never heard a preamp be MORE transparent than NO preamp.... but it often adds a little something here or there that is desirable..... but of course it's still a necessary part of the system.   So you just gotta find one that has colorations that YOU like or that work in your system.   To this day.... I still have not found an AV pre/pro that I like better than my old Anthem AVM-20 for it's analog pass-through.  I've tried 4 different $2-3k pre-pros whose analog performance was terrible..... just to convince myself that i was not crazy.... I plugged my Oppo blu-ray directly into my amp.. and it sounds GREAT...... therefore.... I know for a fact that the analog pass through of the new pre-pro sucks.  My Anthem is not perfect... but it does sound very good.
Each to their own, it depends on you ears, your pre amp. Some preamps are great others disappointing. I use a number of different ones in different systems. My Yamaha c2a is an example of a good preamp. It's fast yet has a degree of warmth and solidly .  System component matching has lots to do with results too- some good components just don't get on sonically yet others  do. Cables can be another question - just be careful handling them. 
Passives of good quality are now being touted as being as good as very expensive active preamps if not better. Taking it one step further if your amp has sufficient gain, going direct can be surprisingly good but as you mentioned, you lose the ability to switch between components The best thing to do is experiment as you're doing and as suggested above, go with what sounds best to your ears
I think what you've just demonstrated is that your system has a very good gain structure. I was running my Oppo BDP105 directly into my mono blocks too for a while as it sounded better than going through the Octave Phonomudule preamp. I built a passive using Slagle autoformers and the sound is somewhat the same, maybe a touch sweeter. 
But it's all about the gain. That's why it doesn't good to go direct with most people's systems. They don't have enough gain, so they need an active pre to help the signal along.