Welcome back to the hobby! I’ve been at this hobby for a very long time and, while I can’t claim to be familiar with the various very latest gear (amps) that will undoubtedly be recommended, I think I can offer some advise on some basic and time proven rules of thumb that might help you make some smart decisions:
Vandersteens: You like them and have decided; they are a good, solid choice. Next, and rule of thumb no.1:
-SOURCE, SOURCE, SOURCE! No amount of information lost at the source can be retrieved further down the line. I don’t like the idea of starting with a turntable with a built-in phono stage. Given the direction you seem to be headed in, this won’t satisfy for long and may (will) cause problems in setting up a good sounding, well balanced system. Consider starting with a solid turntable/arm/cart (especially the table).
-I know the 2CE’s well and they are a very good speaker and will satisfy with your music preferences. They are full sounding with a natural midrange which will do justice to piano and vocals. However, they are not the most resolving or detailed and whenever I have heard them with less than top-tier (expensive!) tubes they have always sounded a bit murky and lacking some detail with a balance that was TOO full sounding to my ears; this, including the already recommended Quicksilver monos which is how a local dealer demoed them for me. I have heard them sound very good with the right ss amp in the context of a well balanced system. I am a die-hard tube guy; but, personally, I would start with a good solid state amp like the Ayre that Stringreen suggests. Many other options available. When you have your front end (tubes?) settled and tuned, then have your dealer loan you (he should....considering) some tube amps and see what you think.
-I would not buy subs yet. You may find you don’t need them and will add a lot of complexity to the initial process of building a system. Get to know how the 2CE’s interact with your room’s acoustics first.
-I like the idea of a dedicated line for your system and since you are having electrical work done anyway ITS A NO BRAINER. Like the attention that the source deserves, this is as fundamental as it gets.
-Start with good solid cables that are not "trick" cables until you are settled with your amplification (low and high level) and optimize later. Mid-level Kimber comes to mind.
You will be getting to know your room and how the new gear interacts with its unique acoustics. IMO, the source is where the magic happens or gets destroyed. Slow down and always remember that component interaction and synergy is key. You have your speakers. I would focus on a front end that will satisfy long term and take it from there. Amplification and cabling that you may replace later would certainly be more than adequate for 2nd or 3rd systems.
Good luck!
Vandersteens: You like them and have decided; they are a good, solid choice. Next, and rule of thumb no.1:
-SOURCE, SOURCE, SOURCE! No amount of information lost at the source can be retrieved further down the line. I don’t like the idea of starting with a turntable with a built-in phono stage. Given the direction you seem to be headed in, this won’t satisfy for long and may (will) cause problems in setting up a good sounding, well balanced system. Consider starting with a solid turntable/arm/cart (especially the table).
-I know the 2CE’s well and they are a very good speaker and will satisfy with your music preferences. They are full sounding with a natural midrange which will do justice to piano and vocals. However, they are not the most resolving or detailed and whenever I have heard them with less than top-tier (expensive!) tubes they have always sounded a bit murky and lacking some detail with a balance that was TOO full sounding to my ears; this, including the already recommended Quicksilver monos which is how a local dealer demoed them for me. I have heard them sound very good with the right ss amp in the context of a well balanced system. I am a die-hard tube guy; but, personally, I would start with a good solid state amp like the Ayre that Stringreen suggests. Many other options available. When you have your front end (tubes?) settled and tuned, then have your dealer loan you (he should....considering) some tube amps and see what you think.
-I would not buy subs yet. You may find you don’t need them and will add a lot of complexity to the initial process of building a system. Get to know how the 2CE’s interact with your room’s acoustics first.
-I like the idea of a dedicated line for your system and since you are having electrical work done anyway ITS A NO BRAINER. Like the attention that the source deserves, this is as fundamental as it gets.
-Start with good solid cables that are not "trick" cables until you are settled with your amplification (low and high level) and optimize later. Mid-level Kimber comes to mind.
You will be getting to know your room and how the new gear interacts with its unique acoustics. IMO, the source is where the magic happens or gets destroyed. Slow down and always remember that component interaction and synergy is key. You have your speakers. I would focus on a front end that will satisfy long term and take it from there. Amplification and cabling that you may replace later would certainly be more than adequate for 2nd or 3rd systems.
Good luck!