CARY SACD Pro CD skipping Issues

I have cleaned the whole cd player with an air hose. But i cannot access the transport laser without the whole transport assembly coming apart. and from what I've heard if you mess with the alinement. Is like trying to shine a laser on a spacific spot of the moon.haha and there was a bunch of dust bunnys in it for sure.
An the issue is I hear the motor revving up and out. Also the cd timer clock still runs but it just mutes in and out.

I talked to cary to fix it they do have a reaper person in ontario Canada. but still no word on pricing?

Your Cary's skipping problem is most likely being caused by the laser sled ... which is trying to read the spinning disc ...  running into a spot of dried up factory lubricant on the laser rails that the laser assembly is traveling on  

The factory lubricant will dry up and harden  in spots on the laser guide rails  ... when the laser sled traveling down the rails hits one of these spots it stalls momentarily due to the resistance of the dried up lubricant stalling or slowing the laser's travel... at this point the laser looses lock with the data on the spinning disc and starts to skip as it can't read the data stream off the disc correctly  

Eventually the laser sled will drive through the dried up lubricant spot and regain lock with the disc's flags and continue to play until it hits another spot of dried up lubricant 

If you can access the rails just clean them of the dried up lubricant and re-lube and the laser should stop stalling and losing lock with the disc  

Very common problem with a fairly easy fix  

Enter your text ...

Keep me posted jakecanada.

Call Cary (after 1pm EST) & speak to the tech help folks there about what it could be.  I installed a new laser transport they shipped me in my 303/300 w/their excellent help.  The player wasn't reading discs.  Good luck.