2. home-theater
  3. 1323786801

System shutting down due to clipping?

From time to time my HT system shuts off when playing at higher volumes. The Yamaha AV unit is running out of juice and I assume it is tripping off as a self preservation function. I am guessing that the rear surround speakers are the culprits since they are 4 ohm. I am not sure whatload the center channel is.
SO how do I fix this? I do not want to change the AV unit and am not real keen about changing the speakers either. Don't even think of suggesting that I turn the volume down.
blueskiespbd
blueskiespbd's avatar
blueskiespbd OP
161 posts
 
I just got off the phone with Yamaha....was only on hold for 50 minutes !! yipeeee. The tech said this AVR can be reset to 6 ohm by holding down the power button and the Straight button during power up. I will try that tonight after work.
This should help and would be cheaper than any other option
if it works.
erikt
270 posts
 
Maybe the AVR power supplies are failing....it is an older model.

If you've had this for awhile and the shutdowns are 'recent' - sure makes the AVR the probable culprit.

Good excuse for an upgrade!! :-)
blueskiespbd's avatar
blueskiespbd OP
161 posts
 
This is not an "older model" New last year. Still under warranty.
erikt
270 posts
 
Well you didn't say the exact full model number.

There was an older RX-V1000 that IS obsolete/discontinued.

The newer Aventage line is the RX-A1000.

Like I said in reply #1 - hope the 6-ohm setting works for you... ;-)

RTM
blueskiespbd's avatar
blueskiespbd OP
161 posts
 
I was able to reset the avr to 6 ohms. At high volumes with dynamic passages it still will shut down. I think I need an extra amp for the surrounds only or else replace the speakers with 8 ohm boxes.
More to discover