Yes indeed that is the correct part number.
Best Capacitors for Crossovers
I am now in the tweaking stage of trying different caps in my crossovers for my DIY homemade 2 way. I presently have and will soon try a 5.6uf 800 vdc +/- 2% Jantzen Audio Silver Z-cap.
I see that Mundorf, V Cap get a lot of accolades, and the Dueland are quite pricey.
Does anyone have a favorite?
I am trying to cross over at about 4500HZ at 6db.
- ...
- 85 posts total
Just a little more info. I put the speaker crossover's in wooden boxes and made them external to the speakers. Seems like all speakers should come this way. Especially for tweakers (Like me). Also, has anyone tried the speaker breaker from Parts express to protect tweeters? Now, I wired the tweeters using ultra pure .9999 silver wire, so I am reluctant to add a breaker with its crappy wire to the connection. |
Best bang for buck Ozzy is the Solens. I was told by someone in the know that a few of the "boutique" branded caps are just re-badged Solens. http://solen.ca/product-category/capacitors/ Cheers George |
Ozzy, it’s really rare an audiophile blows a tweeter, unless you use a very low order filter and it’s too low an F. In additon to the filter, there's usually resistors padding them down, so you have to work kind of hard to blow them. Leave extraneous things like that out unless you are making a party/pa speaker. Best, Erik |
georgelofi, I have tried the Solens and they are ok but they seem to compress the dynamics. The caps I am using have silver leads and silver wiring eric, I do like to play the Pass Labs amp pretty loud sometimes. I'm crossing over the tweeters at 4500hz. There frequency rating is 1700-20000+hz, 6 ohm and have a 30 watts rms rating .I have not added any resistors. First off, I am not sure what they contribute. Can someone explain? Is it for equalizing the levels between the tweeter and woofer? I have been using the Purist break in disc quite a bit and I do believe the brightness is toning down. |
- 85 posts total