2. analog
  3. 1325551242

Eminent Technology ET-2 Tonearm Owners


Where are you? What mods have you done ?

I have been using these ET2's for over 9 years now.
I am still figuring them out and learning from them. They can be modified in so many ways. Bruce Thigpen laid down the GENIUS behind this tonearm over 20 years ago. Some of you have owned them for over 20 years !

Tell us your secrets.

New owners – what questions do you have ?

We may even be able to coax Bruce to post here. :^)

There are so many modifications that can be done.

Dressing of the wire with this arm is critical to get optimum sonics along with proper counterweight setup.

Let me start it off.

Please tell us what you have found to be the best wire for the ET-2 tonearm ? One that is pliable/doesn’t crink or curl. Whats the best way of dressing it so it doesn’t impact the arm. Through the spindle - Over the manifold - Below manifold ? What have you come up with ?
ct0517
ct0517's avatar
ct0517 OP
2,041 posts
 
Hi Nikola.
yeah, I agree with you.

decent
of an acceptable standard; satisfactory.

I still do own some "decent" tonearms.
But because of the ET2.0 and ET 2.5 they don't get used much.
I also still have these three Turntables, even though I use only one really, and only have two ET tonearms. You need a tonearm on every TT.  8^0

This analog stuff just seems to keep going up in value every year,  so I am not really being pushed to get rid of anything extra. .... unlike digital gear.

dlcockrum's avatar
dlcockrum
2,190 posts
 
Hi Chris,

You were right as usual re: the Symposium-modded TNT using Rollerblocks as the sole support for the plinth and the corner footers being for show only. I will attempt to contact jloveys hoping to get some pointers. Thanks for the tip.

nandric: Have to agree with you on the best MC vs MM. The Orpheus L on the ET Two (jabs aside) is on another level vs my MMs/Electrets, yet I still enjoy the latter in my vintage system, especially on beloved non-audiophile rock LPs from the 70s/80s..

Best to you both,
Dave
nandric's avatar
nandric
4,086 posts
 

Hi Dave, Thanks for your best wishes. I feared to be killed by the admirers of this ET 2 tonearm because of my comment. Except by Chris who is my former compatriot and not from Croatia. I see that you are refering to ''Electrets '' carts. J. Carr wanted to extend our discussion about MM and MC carts to other kinds. But, alas, this discussion never got from the ground. If those ''electrets'' are, uh,''decent'' carts, would you be so kind to start a new thread about them? I am sure that J. Carr will participate in this thread. I have no idea about them but this will not prevent my participation (grin).

dlcockrum's avatar
dlcockrum
2,190 posts
 
Hi nandric,

I don’t think you will experience reprisal here over your comments on the ET Two, made in jest or otherwise. We are all confident in the virtues of this arm based on years of listening (and also of tweaking) and comparing, thus knowing that the majority of criticisms come from those that have not made the effort/lack the knowledge to set it up right and/or tried to use it on an incompatible turntable.

Will do re: starting a new thread on the Electrets IF you will help get it off the tarmac.

Best to you nandric,
Dave
dlcockrum's avatar
dlcockrum
2,190 posts
 
@nandric ,

Electret thread initiated in analog forum: https://forum.audiogon.com/discussions/electret-transducer-cartridges-vs-mm-and-mc-what-are-your-exp...

Best,
Dave
More to discover