Best of both worlds? (Relatively speaking)


So, I've been into hi-res audio for a few years now, and have been feeding my digital music to my Vandersteen 2Ce Signature IIs through my Pioneer VSX-1020K A/V amp.

Then I found I could no longer ignore the burning desire to step back into my analog roots, so I took the plunge, or at least stuck my foot in.  I ended up buying a Pro-ject Debut Carbon Esprit DC turntable with an Ortofon 2M Blue cartridge.  I also refurbished my vintage Pioneer SA-9100 integrated amp, and soon was a happy camper listening to every LP I could get my hands on.

Now here's the rub.  My speakers are bi-wired, so every time I wanted to listen to some hi-res music, I had to disconnect the speakers from the SA-9100 and connect them back to the VSX-1020K, and vice versa.  That got old quickly!

Then, I realized that I could use the SA-9100 as a pre amp and connect it to one of the analog ins on the VSX.  It wasn't a perfect solution, but it was a combination of both 'worlds' and I could stop having to do the wire/re-wire dance behind the speakers!

Now, having accomplished that, I'm doing what any good A-goner would do.  I'm wondering how I could do it better?!!!!!

Maybe I could jam both bi-wired pairs of spade connectors to the back of the Vandersteens and use each amp for its original purpose??

Ideas?????

clipdin
Sorry, I don't understand what your speakers being bi-wired has to do with anything. Why do you have to use them bi-wired for digital, but not for analog?

What is your source for your hi-res digital music? Can you connect that source into your SA-9100 and completely eliminate the HT receiver from the mix?
reubent - Sorry for the confusion.  The speaker wires from both amps are bi-wired.  And the reason my hi-res source feeds into the A/V amp is because it does the file decoding work.  It uses an HDMI input which allows the highest level of input.

The spades for both pairs of speaker wires are pretty thick, so I don't think I can fit them both on the speaker connectors, but I think I'll take a second look at that.  I really like the sound from the SA-9100 for my vinyl.  Using it as a pre-amp, then sending it through the A/V amp seems to take some life away.
 Using it as a pre-amp, then sending it through the A/V amp seems to take some life away.
I am not the least bit surprised.  If you truly want the best of both worlds, I would ditch the Pioneer AVR entirely as that's what holding all your music back.  The internal amps are too severely compromised to properly drive such a fine speakers as your Vandersteens (7 ohm nominal, 4 ohm minimum and only 86db sensitivity).   No way are you going to realize their potential with an AVR.

You need true continuous wattage something that the AVR cannot deliver with its bogus specs.   Look at a modern 2 channel integrated amp with a built-in DAC for digital needs and replace both the Pioneer AVR and vintage integrated with one unit that will properly drive your Vandersteens.  NAD, Parasound, Yamaha are all making very good ones now.  You'll be amazed.