WiFi System Upgrades

@williewonka .. I've had my Node 2 since April and have experienced similar. My library is located on a USB hard drive attached to my AirPort Extreme router and on occasion the router needs to be restarted to fix this issue. Sometimes the Node 2 needs to be unplugged from the wall (to restart) as well. Once, I only needed to rebuild the index (which doesn't hurt to try 1st). In general, this only needs to be done after an update from Bluesound. It's kind of a PITA but it has happened infrequently and I love the platform. It's getting better with each update btw.

I find that with about every other Bluesound OS update, I have to reboot the whole system, which involve unplugging the Ethernet source from the router, unplugging my Vault 2, Node, and Pulse Mini and re starting them, occasionally more than once.  One time I had to reindex collection.  I cringe with every update

Guys - Thanks for the input - I’m getting there :-)

What I did find is that the Bluesound seems to be sensitive to routers used in the "network" pathways

For example my router/device path is was as follows
1. is a Wireless Router/Modem that connects to the internet - also has 4 ethernet ports and is the DCHP server fro my LAN
2. is an 8 port ethernet router switch connect to #1
3. is a 5 port ethernet router switch connects to #2
4. my NAS Drive connects to #3 via ethernet
5. my Bluesound connects to #3 via ethernet

A bit complex, but #3 is located with the TV and #1 and #2 are in the basement - I had needed more that the 4 ethernet ports provided on #1, hence the need for #2

I have tried many different configurations, but the above worked te best - until now.

I’ve since removed #2 from the network
#3 now connects directly to #1 and I can now at least see the PowerNode 2

Getting the PowerNode to see the drive can be trying at times and I have not figured out why - yet :-)

I did have issues with re-indexing - the process appeared to see only one song - I have 4000+++ in my library - but that seems to have resolved itself as of this morning
.
I hasten to add - this is not unique to the Bluesound - my existing setup suffers similar issues.

If anyone else has experienced similar issues please tell us how you resolved them - e.g. if a particular ethernet router switch caused the issues - which brand was it and which brand resolved it

Having said that - I just turned on my phone and the library was visible and active - go figure :-)

I am still very impressed by this little box and the comments from my wife - she likes the manual controls on the top of the unit - "it's so simple" - only time will tell :-)

Thanks again

Scott, after success with the Powernode 2 on my av system, today I purchased the Node 2 for my audio system .

It was easy to setup an  A/B comparison between its built in DAC and analogue output stage to that of my Bifrost.

Verdict - I cannot discern any difference between the two units.

And that result is even before the Node 2 is burned in. it is also using a stock power cable, so it should start performing even better.

Needless to say I'm extremely impressed and a very happy camper indeed 😆

That's great, williewonka. You have a fantastic system; thanks for providing feedback on the comparison.

I know I enjoy my Node 2 a lot. I haven't had high dollar sources in my system but the it's the best source I've had.

Cheers,

Scott