Do equipment stands have an impact on electronics?

shadorne
What a totally useless thread full of ad hominem attacks. If the OP actually cares anymore I will add that I concur with Mapman. Apart from turntables, tubes, and speakers, for the most part any mechanical vibration isolation is totally unnecessary with most SS electronics. This can be proven quite simply by gently tapping the chassis and noting that no sound comes out the speaker even with the volume turned up fully. (Of course, don’t try this with a tube amp or with a turntable or with a sledgehammer)

I would add that a large transformer on a massive power amp can vibrate or hum audibly and so can an optical drive when close to the component but this sound is not coming out from the speakers if the equipment is working properly.

sorry, that doesn’t prove anything. We’re not talking about microphonics here, we’re talking about vibration affecting the audio signal in capacitors, wires and printed circuit boards and microchips in solid state gear and how the CD is read and the affect on wires etc. in everything else. If you smack a CD player real hard it could make the CD skip, but you won’t hear the smack coming out of the speakers. Fuses in both tube and solid state gear are suceptible to vibration which is why aftermarket fuses are usually either ceramic or employ anti-vibration means of some sort. Look ma, no ad hominem attack.