Repair a Sony SCD 777ES?

Hi Jafant,  I moth-balled my heavily modified SCD-1 for an Esoteric K01X with Rubidium clock.  There is not a huge difference in performance, but only after modifying the Sony to the point that it became unrecognizable as such.

I still listen to CDs as well as vinyl. The SCD-1 is the best digital source I have. So I am very motivated to get it working again without issues. It would be a shame for a $3 motor to prevent enjoying this excellent CDP.

Hopefully, the sled motor can be replaced. There are 2 reputable electronic repair shops within 25 miles of where I live. The Sony recommended repair facility is in NY (United Radio Service). Did not get a good feeling about sending it there after I called.

I tried to remove the transport assembly to perform the maintenance recommended by dgarretson. Two corner screws came out easily with the correct screw driver, but I messed up the head on the other 2 screws with the wrong size screw driver and cannot get them to loosen.  Lesson learned. I am going to the local repair shop next week.

Good to see you- dgarretson

I liked the Esoteric for SACD playback only. DV-60 model.
I have not auditioned the true higher end spinners.  Happy Listening!

Right On! stevebraxton-

Yes, there are parts still avail for the SCD-1. Lots of searching and researching these forums on A'gon and Audio Asylum will yield the intel you seek.  Rick Rubin and Henry Rollins still uses this CD/SACD player.
Highest praise there.  Keep us posted on your repair situation.

Happy Listening!

Thanks jafant for encouragement on the SCD-1 repair!
To all on this thread who care to provide feedback...

I went to a local repair shop and described the symptoms.
Without looking at the unit, the technician concluded the problem is with the reader (lens assembly) and not likely the sled motor.
Do you agree?

The symptoms are listed below.


Dec 2016 problem with SACD & RBCD playback. Also, an occasional thumping noise inside CDP occurs. The noise can be heard across the room.

Intermittent error: No Disk
If play starts after loading a CD it will usually play all the way to the end.

If play does not start then eventually the "No Disk" error will occur.
I can hear the disk spinning during the load process.

When attempting to select a specific track, the track number shows on display but eventually, the "No Disk" error occurs.