To power condition or not to power condition AVR

99.9% of AVRs have the very cheapest quality build power supplies made-in-Chin that simply don't compete with any quality build audio amp.  they are built to a very very low price-point and resulting build quality point.  Add to this the crap build quality quotient because it is Chi-fi.......

accordingly,

(1)  high end power cords are not going to provide you with any added video or audio step up in performance..... resist the illusion that high end power cords are any silver bullet. There are a buzzilion PCs up to a $150 pricepoint that handily best the POS quality stock power cords but max out performance wise in video.
(2) contemporaneously, with the absence of a quality build power supply,  the introduction of a power conditioner won't provide you with any further improvement past (1)

what will I'll add the best improvement for AVR and display units:

--run a dedicated power line line from the breaker box to proper hospital grade (or better) wall receptacles and just plug it in directly.

@akg_ca thanks for your reply.  Seems like poor power supply would benefit from power conditioning more than a high quality supply? But, according to the manufacturer "Unlike most AV amps the AVR400 has a huge toroidal transformer that gives it enough current to tame even the most difficult of speaker loads." While there is undoubtedly hype here, the amp measured well in a review test bench, and sounds more accurate to me compared with Onkyo, Denon, Pioneer, etc.

Already using an after market cable directly to hospital grade outlet fed by dedicated 10 AWG, 20 amp line.

I should have read your response to my thread about power cords first, I see where you are coming from.