2. best-of
  3. 127783-435

Audiophile fuses - Synergistic Black fuses vs the còmpetition

Between friends samples and onew I havd bought I find that these Synergistic fuses to be the best balanced. And without question inner detail .I originally had Hifi tunING supreme.which are good  but not in the SR class 
The Audio horizon I found more tipped up compared in certain areas furutech were no where's as detailed . The SR  Black fuses use the latest in Graphene  technology everyone from Nasa 
To the latest hi tech 3d printing and many 1,000s denser then Copper.Silver or Platinum.
All super computers are now using and soon home computers it is much faster and accurate.
But also smoother and more organic sounding parts connecxion if you purchase at least 3 or more 
May give you a respectable discount. Email Chris the owner at Tech go to the site . Lucky I only had 5 in my system. One thjng that was surprising is that I put one in my JL audio  Subwoofer  thd bass was noticeably more accurate and articulate.  2 thjngs to mention .these fuses take up to 200 hours to fully runin.but after 100 hrs 90% of the runin  is complete, also  Always go up to the next size ,for standard cheap steel fuses can vary up to 15%,where these fuses are typically within 
1%.  I found that no fuses popped .on a Modwright pre I popped 2 , then went from 2 to 2.5A
No problems and Make sure you get proper  slow-timed ,or Fast blow. A No Brainer like a very good cable upgrade and comes with a 30 day money back guarantee. 
128x128audioman58
audioman58's avatar
audioman58 OP
4,201 posts
 
As usual a lot of ignorant statements .a lot of critics with nothing  to
say but negatives .unless you have personally  put these fuses in your system
and give them at least 100 hours then don't comment  for you are speaking out of ignorance .and with some I have found the fuses are to pricy for their $500 
receivers .and a lot of exotic metals first get their start through high tech agencies like military or NASA to answer some of the skeptics.
if you took the time and looked up metal index on resistance copper or silver  has 
7 times less resistance then the cheap steel fuses ,resistance is a bottleneck 
that is why each fuse  makes the system that much better.
mapman's avatar
mapman
22,381 posts
 
Gs asked about data to support the claim? Nothing ignorant there. Why are you attacking people over a fuse?

also I have a sr red fuse in my preamp.   
dlcockrum's avatar
dlcockrum
2,190 posts
 
"Why are you attacking people over a fuse?"

mapman,

You post as if you are not intimately familiar with the viscous personal attacks by ptss and georgelofi on the other SR fuse thread while you stood on the periphery prodding them along.

I knew that this thread was ill advised from the beginning (second post) and now audioman is finding out why.

Dave
stevecham
3,340 posts
 
Wait a minute, a fuse is SUPPOSED to be a resistor, that's how it functions. And where in the world did anyone get the fantastic impression that the audio signal propogated through the fuse? If you want to hear a difference/improvement call it what you will, BY GOLLY YOU WILL HEAR IT!
dlcockrum's avatar
dlcockrum
2,190 posts
 
Heck, I don't know Steve. You have a system where you can hear the differences. Why not try them and see for yourself?

Dave
More to discover