2. best-of
  3. 127783-435

Audiophile fuses - Synergistic Black fuses vs the còmpetition

Between friends samples and onew I havd bought I find that these Synergistic fuses to be the best balanced. And without question inner detail .I originally had Hifi tunING supreme.which are good  but not in the SR class 
The Audio horizon I found more tipped up compared in certain areas furutech were no where's as detailed . The SR  Black fuses use the latest in Graphene  technology everyone from Nasa 
To the latest hi tech 3d printing and many 1,000s denser then Copper.Silver or Platinum.
All super computers are now using and soon home computers it is much faster and accurate.
But also smoother and more organic sounding parts connecxion if you purchase at least 3 or more 
May give you a respectable discount. Email Chris the owner at Tech go to the site . Lucky I only had 5 in my system. One thjng that was surprising is that I put one in my JL audio  Subwoofer  thd bass was noticeably more accurate and articulate.  2 thjngs to mention .these fuses take up to 200 hours to fully runin.but after 100 hrs 90% of the runin  is complete, also  Always go up to the next size ,for standard cheap steel fuses can vary up to 15%,where these fuses are typically within 
1%.  I found that no fuses popped .on a Modwright pre I popped 2 , then went from 2 to 2.5A
No problems and Make sure you get proper  slow-timed ,or Fast blow. A No Brainer like a very good cable upgrade and comes with a 30 day money back guarantee. 
128x128audioman58
dlcockrum's avatar
dlcockrum
2,190 posts
 
Heck, I don't know Steve. You have a system where you can hear the differences. Why not try them and see for yourself?

Dave
geoffkait's avatar
geoffkait
23,365 posts
 

stevecham

"Wait a minute, a fuse is SUPPOSED to be a resistor, that’s how it functions."

Really? Then how come the whole goal of high end fuses like SR and HiFi Tuning and Audio Magic, etc. is to increase the CONDUCTIVITY of their fuses by using pure metals and cryogenic treatment. Thus, LESS resistance will be measured across aftermarket fuses compared to stock fuses. Electrical CONDUCTIVITY is the reciprocal of electrical RESISTIVITY, Hel-loo!

"And where in the world did anyone get the fantastic impression that the audio signal propogated (sic) through the fuse?"

Well, for one thing from the fact speaker fuses are mounted right where the audio signal enters the speaker. My Fultons had one fuse per section.

"If you want to hear a difference/improvement call it what you will, BY GOLLY YOU WILL HEAR IT!"

Most likely for fuse skeptics the rule is, "If you are psyched out by fuses or aren’t sure what to listen for or believe fuses are a scam BY GOLLY YOU WONT HEAR IT!
analogluvr
859 posts
 
Your right. It's a no brainer just like a cable upgrade. 
mapman's avatar
mapman
22,198 posts
 
Dkcockrum. Those were in self defense perhaps which is different. Some people make a habit of attacking people When challenged on an issue and bully tactics cannot be tolerated ever.   It’s an epidemic in this country these days it seems.
dlcockrum's avatar
dlcockrum
2,190 posts
 
"Those were in self defense perhaps which is different."

mapman,

audioman probably felt the same way above following your post: "That might be fake news previously known as made up stuff."

If you are speaking only for your reactions in the other thread, then fair enough. In no way can this be attributed to the others. They inserted themselves into that thread with the sole intent of ridicule and mayhem.

If folks stop posting here about their positive experiences due to fear of personal attack, this forum will serve little purpose IMO.

Dave
More to discover