The Palladian-A step beyond

Thuchan
My definition of good turntable design, includes "isolation", that has been built into its design by its maker, allowing it to be placed on multiple locations. The Döhmann’s Helix table you reference seems to follow this philosophy. A collaborative Australian/American effort.

Nikola
I said here earlier, when I was freed of the monkey suit, it took 9 months to realize it was gone. Things became more clear. What was happening at the Macro world level was out of my control, including my own government’s "sorry" actions. What was in my control, was my own local family government - at the time made up of Financial Advisors - making decisions on where my investments should go. It took a while to get to the root of this problem and become aware. My own family government was causing some sleepless nights. Something was not right. So I stepped out of my audiophilia nervosa state, fired them, and took control of my own family government.

God grant me the serenity to accept the things I cannot change, the courage to change the things I can, and the wisdom to know the difference.
Reinhold Niebuhr

We are in for quite a ride in 2017.
The craziest "audio" aspect for me to comprehend these days. Both my main speakers are of British origin, but were sourced from the US when the Canadian dollar was at par and even above for a time. Seems almost unthinkable today. You know, my kids don’t believe me when I tell them mortgage rates used to be 18% when they were born. Only 22 years ago.

Nikola - my last post was in response to your last post which was deleted.

:^(

Maybe you should stop using that T word in your posts ?
And I don't refer to titanium. 

Finally to report on my new screws -- as mentioned they come nicely presented, two pairs one shorter set and one longer. Each with a small plastic type washer. The shorter pair were an exact swap for the brass screws that had come with my Palladian. One difference is that the Timet screws are allen key mounted while the brass used a screwdriver -- generally the former is to be preferred if for no other reason than minimizing the chance of the screwdriver slipping and causing who knows what damage 😏

The Timet 1100 screws are a little lighter than the brass so VTF needs to be reset (about a .15g change, so quite a lot)

With it all set up on to listening and yes they do make a substantial improvement -- probably the best way to describe it is that there is less smear -- transients are cleaner and more distinct (by which I mean different sorts of things, different metals or metals vs woods, sound more distinct from one another) and the absence of ringing on the decay of things is very striking -- this then uncovers all sorts of extra details (breathwork, hidden backing vocal lines etc) that the ringing and smears had masked

So if I had to guess I'd assume that the Timet material stores less energy than brass or alternatives and this is the reason for the benefit. Note that in my installation this is not a matter of being able to simply tighten the cartridge down more -- as my headshell is some sort of composite material you cannot actually over tighten without deforming it 

All in all the new screws are a must have with the Palladian (and I think now ship with it?) -- as to whether they'd offer equal benefits from other cartridges who knows -- maybe I'll take the two longer spares I have and see if I can mount them on my Miyajima Zero Mono on my #2 arm -- will report back on what I find

ps still no spacer, when I get that I will remount my arm, may even be able to eliminate my sub-arm board completely and thus obviate need for spacer but so far teh Palladian sounds great running horizontal

Folkfreak, 
As you are now aquainted with the titanium screws you may need a titanium tonearm. Are you already running one?  I just got a SpJ fully titanium tonearm, also the tube. Here the Timet screws feel very familiar with the Palladian...the sound is terrific. I am using the combo on my Caeles table.