2. cables
  3. 1335297906

High Fidelity Cables CT-1designed by Rick Schultz

In December 2011,I wrote that High Fidelity cables led by cable designer Rick Schultz was putting together a new cable.The cable came to market as CT-1.The CT-1 has FINALLY made it into my system!I had obtained a version of the prototype that Rick had been working on.It blew my previous reference Genesis by Virtual Dynamics.I thought I had finally found my end with this cable.This prototype delivered to my ears "Nirvana".Could I be at the end of my quest for the ultimate sound?
No. I received two pairs of CT-1 to replace my prototypes.They went into the system this past Friday.Unable to dedicate time until Sunday listening,I stole a few moments,ducking away from company with anticipation.My guest could tell even with the music set for"ambiance"something was intriguing and I was in for a treat!
The experience:
First off,CT-1 was very user friendly.Installation was simple;the cable is very nice and light.The female RCA fit beautifully unlike any I had found in other cable.It was secure and reliable.It seemed much thought was dedicated to developing a designer fit to an aesthetically stunning RCA connector.Install entailed a few wiggles to ensure what seemed like a compression fit on my RCA.
It was 2-3 hrs. for the 1st step of break in to be complete.At that point I had something different!Today,although they only have 10-12 hrs. on them,I can`t put into words how much my system has transformed.Believe me,I loved my prototypes.However....there is simply no comparision.
The clarity and sound is so natural.
The soundstage is like nothing I ever heard.Resoulution is breathtaking and inner detail is simply hard to believe possible.
The sound has transended and now it simply does not seem as thought I have speakers.
My system is musicians playing music.
I am told with time they will improve and I trust that as it was revealed with the prototypes.I wanted to share my thoughts with you that now.
Unequivocally,a testament to High Fidelity,as the name declares.
High Fidelity Cables for me,the last word on it,after 12 hours!
Truly Amazing

Al
alpass
misterbritt
22 posts
 
@knghifi Very good on the update. I spoke to them about a month ago so your response is more recent.

Per your second paragraph, my understanding is that the Reveal line does not have magnetic conduction (connections) at the ends. We're in agreement on that. But also one can see that the wave guides are of a different design from the CT-1s and up. I don’t know about the difference specifically, but they are visually different in their egg shape. In fact, I have a pair of Reveal 1.5M speaker cables but I cannot install them logistically until the long run of balance IC is installed.

Per your third paragraph, I think the materials inside the wave guides are better as you go from CT-1 up the line. I think it is more than just the size of the wave guides. Per a review from 6moons:

"High Fidelity Cables declare that their enhanced version [they were reviewing the CT-1 versus the CT-1 Enhanced] sports a different conductive alloy for higher ferromagnetic permeability and hence increased levels of magnetic conduction and performance."
knghifi
1,668 posts
 
Per your third paragraph, I think the materials inside the wave guides are better as you go from CT-1 up the line. I think it is more than just the size of the wave guides. Per a review from 6moons
Of course it's better  LOL!

 
ddraudt's avatar
ddraudt
609 posts
 
As far as the progression of non-Reveal HFC cables. there have been changes in magnet size, strength and configuration as well as  differences in the wire alloy, and adding magnets in the ends of cables and cords.
I have found that the axiom- "more magnets makes more music", has been true in my research and usage of HFC items. One example is that adding a set of 4 of the original RCA adaptors to My PRO IC's was a big improvement. and adding MC-0.5's before my Pro power cords makes a big improvement.
ddraudt's avatar
ddraudt
609 posts
 
pete, Wow 28 MC-0.5's! Only Rick uses more. (36)

 I have a double duplex outlet setup and I have used one 
orange straight 3 to 1 and one green "L" shaped to hold 6 mc-0.5's
and still be able to plug two other plugs in. I plug my system in one of the remaining open outlets and the other one plugs a short cord connected to another duplex outlet that has 2 each 3 to 1 orange 3 sided adaptors that I add another 6 MC 5s. I can easily add another dozen MC0.5's with some combination of the 3 types of 3 way adaptors.
Post removed 
More to discover