2. home-theater
  3. 1130417285

Separates for 2-channel & HT, or.....?

I posted this in the amp/preamp forum too - no responses as yet so I will try again here. I hope double posts are not frowned upon.

I am coming from the simple world of SS receiver and separate SS power amp - Rotel gear, as you can see from my Virtual System. I am trying to find a more musical system, but I still need to have a system that can be used for HT. Optimized 2-channel is more important to me, but I can't make two separate systems - no room. :-(

I am changing out my speakers to Cain & Cain Abbys - single drive (Fostex 166E) high efficiency speakers (95dB.) My Teres turntable is also a keeper, as is my phono stage. These are about the only decisions I have been able to firm up! So, I am building my system around these components.

I need either an integrated amp or separates - pre amp/power amp. I thought tubes would be best for the Abbys, but then again, maybe the pre should be solid state with a tube amp - or is the other way around better? You see how unknowing I am! An integrated amp might be a bit of a compromise, but might also fit my budget better. :-~

This is what I need the system to do: I need to be able to run my CD drive, a DVD drive, my phono stage and a subwoofer, as well as, of course, front speakers. If I end up getting rid of my receiver, an option for rear and center speakers would be a plus, though I may forgo surround sound (5.1) with my new system.

My budget is around $10,000 which is both limiting, I realize, and more than I wanted to spend. :rolleyes: I would like this budget to include a new CD-player - I am considering the Musical Fidelity A5 - so I guess my actual amp/preamp budget is around $8000.

So, should I keep the receiver - or get a better one - and get an integrated amp with an HT pass through, or go with separates, or????
oakiris
chadnliz's avatar
chadnliz
3,737 posts
 
Why not scrap your phono in favor of a tube pre with phono built in? No wires or power supply to deal with is a big bonus, and you have alot of money to spend, I think if you spend wisely you wont need near your budget and will be able to get alot of music or movies....good luck!
PS I added a tube pre to my Rotel Pro (I run it thru the multi channel bypass) I use it for 2 channel only and although there is always better I am really happy with what I have, it really sounds alot better than the Rotel did on its own....and the Rotel trounced my Onkyo reciever.
flrnlamb
508 posts
 
Bose...it's supposed to be the best. Oh, and I hear Fisher makes good receivers.
oakiris OP
206 posts
 
Very helpful, Flrnlamb....You buy all the Bose stuff you want! :-)

Chadnliz - If I happen to get a tube pre with a phono stage superior to my stand alone Holfi, I will indeed remove the Hofi. What I would really like to do is get a stand alone tube phone stage at some point, but right now I am concentrating on just getting a better front end for all of my 2 channel and HT needs. What tube pre did you end up buying?

I am hoping to spend quite a bit less than $10K on my front end; I'll put the rest in savings for my next bout of upgraditis! I may actually try some new power cords,too, just to see what all the fuss is about (all my power cords are stock at this point.)

Holly
fplanner2000
616 posts
 
My system is designed around 2-channel first, then HT, altho it started the other way around. Tube pre and SS amp is definitely the way to go, IMO. Also, contrary to some of the posts above, a HT bypass isn't necessary on the pre, especially if you have a good pre and want to hear its contribution to movies.

I have a Sunfire TG4 which now is my HT processor, driving a Sunfire amp which feeds center and rear channels. Front end is an APL modded Denon 3910 into a VAC pre driven by a McCormack DNA-500 amp. I have great 2 channel as well as great HT. Yes, it cost lots more than $10K, but the point is, it can just as easily be done with more modest components.

And yes, power cords DO make a difference - the more revealing your system, the greater the difference, IMO.
Hope this helps.
avrij's avatar
avrij
70 posts
 
Sorry to be so basic, but tell me how to set up the tube pre between the denon and your processor. Do you just put it in between and run it thru the bypass option?
More to discover