2. home-theater
  3. 1130426046

How do I easily add surround to my 2 channel setup

Well first things first. My current system is:
iMac Lossless iTunes Music Collection >> Lossless to Airport Express >> toslink >> X-DACv3 >> Old Junky Integra reciever >> Totem Acoustic Sttaf's

I have been waiting to aquire a Jolida 302b to put in place of the old Integra to give tubes a try ...I am not dead set on this though ...i picked it based on review and price point (can't audition it here in Indianapolis).

My dilema is that we have decided to buy a condo and it allready has 2 in-wall and 2 in-ceiling wired speaker cavities in the main room, and 2 additional installed in-walls in the bedroom (all wiried to one jack behind drywall). I don't care a great deal about having a super surround system, but since there are there ...why not use the speakers. I watch a few movies and a lot of sports, but mainly listen to music. (maybe 25%/75% movies+sports to music). I would probably just do a 5.0 surround setup and use the totems for my L/R and ceilings as surrounds and maybe the 2 in-walls as center? (they are about 4 feet apart ...so

I am thinking of getting something like a Marantz SR5600. It is 90 Watts (my totems have a sensitivity of 88) and it has Pre-outs for each channel ...this way mayby I could just get a dedicated AMP? for the Left/Right. I dont want to spend a ton of money here (less than 1G) and I could sacrafice the x-Dac if the reciever had toslink and a decent Dac (maybe use that money for a dedicated amp for the front channels?). Also if there is an integrated surround that performs well in stereo I am open to suggestions.

Budget ~$1000 if I keep my Xdac ...~$2000 if I sell the x-dac and use the receivers.

I listend to Jazz, Americana and watch sports and movies.
shawnparslow
elevick
2,638 posts
 
I would consider a Denon receiver. You can assign 2 channels to run the speakers in the bedroom?
Also, you could use either pre-amp outs or the multi-room output to power the amp for your totems. For best sound, you really need tonally matched speakers across the front. I would be inclined to either splurge and buy a Totem center (does it exist?). Buying matching in-walls all around for theater is the other option. This would leave you with 2 systems-totem with jolida for stereo and in-walls for theater all run through the denon?
The Jolida is nice but leave some room in the budget for new tubes if it still has the stock ones.
It sounds messy but that is the only way to get good theater and good stereo through one system using 2 different amps.
Also, don't forget the sub!
shawnparslow OP
23 posts
 
Thanks ...I was peaking at the Denon's just now ...I also saw the NAD T763.

I must say ...I would deffinitly prefer fewer components. I was thinking that getting a goor integrated surround/Receiver/Dac would let me then just get a decent amp for the front channels.

I dont want to tailor my system for surround but if there where an all-in-one receiver/surround/stereo/dac that would be better than my Integra & xDac I would prefer this solution for now. I saw the NAD was 1300 and had "enhanced stereo" mode where it puts more power there when running 2-channel i guess.

If anyone has any other receiver suggestions or words-of-advise go for it. I am sure someone is saying keep the stereo rig going an then just pick up a cheap slim surround receiver ...but I would lik things discrete and space is an issue.
tgrisham
1,291 posts
 
My advice is to find the cleanest pre-amp/processor that will keep the 2 channel on a direct pass-through, then add amplifiers. My older Denon did have great sound with separate amps from Outlaw and it is an affordable way to go. Outlaw Audio does make affordable separates as well as receivers (which I have not heard) and they can be found used as well. I own the M200 monoblock amps and see no reason to get anything else. Outlaw is also a good internet company to deal with and has excellent customer service, even if you are not the original owner.
More to discover