2. cables
  3. 128262-90556

Bi-wires links for speakers ?

I heve the Proac Studio 140MKII single wire connected to my Mcintosh system with Tellurium Q Ultra Black speakers cables ,my speakers have the standard metal strip jumpers which came with the speakers and I am considering to replace it with the Tellurium Ultra black Bi-wire cables links which are not cheap at all.
Is it worth it ? Do I get sound improvement by replacing standard jumpers with hi-end Bi-wire links?

https://www.telluriumq.com/jumpers-bi-wire-links/
itzhak1969
stanwal's avatar
stanwal
3,147 posts
 
In wrong place again!
itzhak1969 OP
515 posts
 
Unfortunately it's  the same with power chord cables,  you are buying expensive gear and manufacturers is using the very basic cheap stock power chord cables.it's really a shame. 
pbnaudio's avatar
pbnaudio
1,617 posts
 
One very easy thing to try - then determine if you hear a difference  Connect your Speaker wires to the Upper set of terminals letting the jumpers feed the bottom ones - then reverse it attach speaker wires to lower terminals letting the jumpers feed the upper ones.  Make sure you tighten the cables properly each time (this DOES make a difference)

If you hear no difference the jumpers do not matter 

Good Listening

Peter

More to discover