2. cables
  3. 1335297906

High Fidelity Cables CT-1designed by Rick Schultz

In December 2011,I wrote that High Fidelity cables led by cable designer Rick Schultz was putting together a new cable.The cable came to market as CT-1.The CT-1 has FINALLY made it into my system!I had obtained a version of the prototype that Rick had been working on.It blew my previous reference Genesis by Virtual Dynamics.I thought I had finally found my end with this cable.This prototype delivered to my ears "Nirvana".Could I be at the end of my quest for the ultimate sound?
No. I received two pairs of CT-1 to replace my prototypes.They went into the system this past Friday.Unable to dedicate time until Sunday listening,I stole a few moments,ducking away from company with anticipation.My guest could tell even with the music set for"ambiance"something was intriguing and I was in for a treat!
The experience:
First off,CT-1 was very user friendly.Installation was simple;the cable is very nice and light.The female RCA fit beautifully unlike any I had found in other cable.It was secure and reliable.It seemed much thought was dedicated to developing a designer fit to an aesthetically stunning RCA connector.Install entailed a few wiggles to ensure what seemed like a compression fit on my RCA.
It was 2-3 hrs. for the 1st step of break in to be complete.At that point I had something different!Today,although they only have 10-12 hrs. on them,I can`t put into words how much my system has transformed.Believe me,I loved my prototypes.However....there is simply no comparision.
The clarity and sound is so natural.
The soundstage is like nothing I ever heard.Resoulution is breathtaking and inner detail is simply hard to believe possible.
The sound has transended and now it simply does not seem as thought I have speakers.
My system is musicians playing music.
I am told with time they will improve and I trust that as it was revealed with the prototypes.I wanted to share my thoughts with you that now.
Unequivocally,a testament to High Fidelity,as the name declares.
High Fidelity Cables for me,the last word on it,after 12 hours!
Truly Amazing

Al
alpass
68pete
1,001 posts
 
Hi lak
I think it would depend on the power strip and the power cord. Some power strips add more noise to the power. The power cord would have to be  very short,19 inches or less. With the 2 different 3 to 1 splitters i use i can get 13 MC O5s in a short amount of space, less than a 19 inch power cord length. The splitters are cheap compared  to a good power strip and a good short power cord.  The splitters work well giving me great sound upgrade across the board. If its working well and not broke no need for a change. The more MC O5s in a shorter distance seams to work well for me.

Hello misterbritt
I use to use a PSaudio P10 and found for me the more MC O5s That where plugged into the same wall plug as the P10 worked best and when plugged into the open sockets of the P10. It just did not sound as good. Later i add a MC 6 Hemisphere, That was plugged into the P10and after a long break in of the Hemisphere. That sounded pretty good, then i removed the P10 from the loop completely and the sound just took off to a much more enjoyable sound with more detail and much wider sound stage.
enjoy Pete
misterbritt
22 posts
 
@68pete Sounds good. There's a lot to consider. I'm going to let the four MC-0.5s I just got yesterday do their thing and burn-in, etc., the way way I have it. With just four I don't really need a power strip or splitter for now. If I elect to add more I will pursue that. The only benefit that I can imagine of using a power strip or splitter at this time is that it would enable me to plug all four of the MC-0.5's into the same exact outlet that is being used with a single power cord for my conditioner(s). So I guess my only concern at this time is whether there is some loss of effectiveness having three of the four MC-0.5s plugged in upstream of that outlet, albeit on the same dedicated 20 amp line. 
romazicon's avatar
romazicon
25 posts
 
Pro series speaker cables finally arrived yesterday.  They have replaced a set of CT-1U speaker cables.  Despite Pro Series RCA interconnects and Pro Series power chord already in the system, and even without full break-in, this is probably the largest SQ jump yet that my system has seen.  Very difficult to wipe the smile off my face :).
t_ramey
632 posts
 
I received two of the mc-05’s today. My first HF product. Began experimenting with my video setup first by plugging one into the wall socket my Surgex is plugged into and the other into the Surgex itself on the same receptacle the plasma tv is plugged into. Noticed an improvement in clarity and definition after about 5-10 minutes. But got even better results when I took out the wall mc-05 and put it in the Surgex into the same receptacle the blu ray player is plugged into. It did take 5-10 minutes for it to take effect after unplugging from the wall into the Surgex.

Haven’t begun playing around yet with my two channel setup but it seems people are letting their mc-05’s burn in for 100 hours or so before noticing good improvements in their audio. Are there ill effects of plugging and unplugging these mc-05’s in different places in the audio setup or is it best to plug them in one spot and let them do their thing for several days?
68pete
1,001 posts
 
Hello  t_ramey
Have found they are at their best when plugged in and left alone one spot was better. Each time you move them it will take a little time to settle in where you moved them to. I do not believe moving them around hurts them in any way. Just takes longer for them to get into your  sound or video system.
enjoy Pete
More to discover