Call me at Audio Connection
973,239,1799
Best JohnnyR
973,239,1799
Best JohnnyR
vandersteen quatros and high pass filter issues
I have been running the pair with a pre and power combination but Now would really like to use ONLY an integrated amp .... which only has RCA inputs
The high pass filter M5 HPB that came with the speaker's are however balanced ( XLR both ends)
Grateful if some one can advise if i can connect the high pass filter from a CD player with XLR output and use a XLR to RCA adapter to connect to the integrated amp
**Read somewhere that as along as the input to the high pass filter is balancer , then the output part is okay to be used via an adapter
Best /
The high pass filter M5 HPB that came with the speaker's are however balanced ( XLR both ends)
Grateful if some one can advise if i can connect the high pass filter from a CD player with XLR output and use a XLR to RCA adapter to connect to the integrated amp
**Read somewhere that as along as the input to the high pass filter is balancer , then the output part is okay to be used via an adapter
Best /
- ...
- 5 posts total
Johnny is the best. Take his advice. There are converters for XLR to RCA available from Jensen. http://www.jensen-transformers.com/product/pc-2xr/ You can contact Jensen and get their recommendations, as well. Bob |
With RCA Hi Passes for Quatros Make sure you run Track 27 off Vandertones put voltmeter on AC Volts which is hooked up to plus / minus of amp adjust volume to 1 V AC with Trk 27 1000 hz tone. Next switch to Track 30 and make sure you read ,707 on the volt meter. if not start above over with reaching 1 V / .707 adjust high pass dip switches until you reach .707 Best JohnnyR Audio Connection |
- 5 posts total