VPI Scout Set up

The DV20 low out version and a DV P-75 phonopre, is an extremely good combo for the money. I have the exact same setup on one of my Scouts.

If you take your time and follow the instruction, you'll have no problem with setup.

Ortofon cartridges match well with VPI tone arms.  I had various Regas (P5, P7 & P9) prior to my VPI Aries 3x3.  At first, the 3D tone arm was intimidating but once I read and understood cartridges set-up geometry, it all made perfect sense and I gained a bit of satisfaction once I delved into setting the arm up.  But, I had the right tools, also (Dr Feikert gauge, Fozgomter, digital scale).  I agree with starting out with a Rega TT/Rega cartridge set up to see/hear if vinyl is to your liking.  Regas are an easy resell, too.  May I suggest that if you go the Rega route to go ahead and purchase the TT-PSU power supply (comes standard on some models).

@brf.  Absolutely agree.  Both my Linn and Basis were purchased and set up in my home by dealers and IMO, it's the best way to go.  But the OP's post implied he would be doing it himself, hence my recommendation.  

I have the Scout and the Dynavector 10X5 high output MC cartridge along with Vincent PHO-700 phono section. I had a dealer mount and set up the cartridge but with the right commonly available tools it should not be hard to do yourself. It comes with most of what you need.

Thanks for the input. Jumped up and bought the Prime with Zephyr Cart and dealer setup. I'm in the game to stay!