How to measure the preamp output?

What you really need is a power meter on the amp outputs. I think you can find them on ebay.

Best,

E

Usually you will hear the amps distort long before you can damage them. :)

I would have thought the combination of the preamp maximum output voltage, amp's input voltage sensitivity and to some extent the speakers sensitivity, serve as good guidelines in terms of how "stressed" the amp is under certain volume conditions. Just as an aside, I suppose one could also measure the (A/C) voltage at the amp's speaker taps and calculate the power (in Watts) coming out of the amp. The challenge is the voltage will fluctuate constantly according to the amplitude of the music being played.

Don’t bother. As Erik alluded to, if there’s a problem you’ll hear obvious distortion occurring on high volume musical peaks.

To perform a proper measurement, you would need a measurement device that is extremely fast acting; that has bandwidth extending beyond 20 kHz; and that provides a peak/hold function so that brief dynamic peaks will be held long enough for you to see them.

Some oscilloscopes can do that, and probably also some particularly sophisticated voltmeters. But why bother, when the onset of obvious distortion figures to be the bottom line?

Regarding the comment about the maximum output voltage of the preamp, that specification should be thought of as the preamp's maximum output voltage **capability**.  And it should be, and almost always will be (at least in the case of reasonably well designed audiophile-oriented equipment) much greater than the voltage that is required to drive a power amp to its maximum power capability. Otherwise a risk would be created that the preamp itself might clip on high volume peaks, in addition to other possible adverse effects such as increases in preamp-generated distortion.

Regards,
-- Al