2. amps-preamps
  3. 129691-78269

ARC PH7

Hello everyone. Just want to run this buy you guys to see what comes out of it. I recently purchased gently used Audio Research PH7 phono preamp. The Preamp had 3 hours on the tubes according to the display. I have had it for a week now and till now it has worked flawlessly. Typically I will mute the preamp to change records, etc. Today I muted changed a record and when I unmated the right channel did not play. turned the unit off and waited for about 10 mins and powered it back up, and the right channel came back. muted/unmuted right channel goes out. According to the seller the PH7 lay dormat for a few years prior to selling it. I am wondering if it could be one of the tubes could simply be failing, but it seems more like a curcuit problem than a tube problem. Any thoughts or experience with this particular issue with the ARC PH7?
barnettk
barnettk OP
410 posts
 
@noromance 

I dropped it off at my local guys shop yesterday and we discussed this. It is one of the approaches he is going to take. Hopefully by cooling down whatever component is causing the problem will make for a faster turnaround. Otherwise he will have to trace it down with a meter which will take a little longer. We will see. One of he problems is that if I have the lid off it does not get hot enough to cause it to fail. The good thing is that once it's in the failed state it stays that way until you recycle power. I have a feeling that he will have to trace the schematic and determine where the culprit is. 
barnettk OP
410 posts
 
Hi guys well we found the problem with the PH7. The mute relay was bad. The tech found the problem in about an hour including the time it took to fail. Right under $200 to fix the problem. Hopefully we have had our glitch for this mission. 
Thanks for all the help. Back to the music. 
dweller's avatar
dweller
3,827 posts
 
Ahhhhhh, all better...
More to discover