Best fuses for under $50?


I need six of them for a power amp therefore I need something more economical...  say $50 or less. Any suggestions?


robertsong
If you want the best fuse,s you can buy & need a 20A you can get the Synergistic Research black for $28 plus shipping on e-bay , I use these in my Mark Levinson 23 with a Synergistic research element tungsten power cable & have been very happy with the results 
Auxinput, great post! Yes those breakers would also work nicely. No reason to ever use a fuse in the power supply.  
You don't necessarily need the CB to be inside the chassis. You could wire it into the power cord externally and either bypass the existing fuse holder or put a very high amperage fuse in the existing fuse holder. Maybe all these uber expensive power cord manufactures should put a CB in them. Or even the fancy power receptacle manufactures could include a current limiting device similar to what they do with the GFI circuits. A current limiting device will protect everything past it. So that would actually add protection to the power cable too. Not really necessary, but still an advantage.
Welcome to Audiogon, robzz.

gbmcleod, your post above is an excellent example of the kind of post that has been long awaited on the topic of fuses vs the usual banal debates.

Recognition that fuses can and often do made audible differences, that there are individual sonic differences between and within brands, that it is key is to find the one that best suits a given piece of gear and listener preferences and, most importantly, going further to provide specific observations/recommendations to another on different fuses in a specific component based on your actual first-hand experience is, well, Wunderbar.

Hat off to you.

Dave
My stereo amp uses 7 fuses !
Replacing the original glass fuses with ceramic fuses made a positive 
improvement , I then purchased an expensive fuse for the main power
and while I did hear an improvement over an off the shelf fuse I can't say it was  big enough to justify the many times the price I paid .
I did discover that you should purchase a name brand fuse ,
I had used generic fuses from my local electronics supplier
and discovered the difference in sonics after one blew and I replaced the 6 on the board with Bussman fuses. Wow what a positive difference.
I went further and replaced the 6 sets of fuse holders on the baord
with Littlefuse solid copper silver plated holders and
I replaced the 20 amp main fuse holder with a military spec 30 amp
holder.
AND NO YOU ARE NOT A FOOL AS analogluvr WOULD HAVE YOU BELIEVE.
IF YOU CAN AFFORD IT AND YOU HEAR AN IMPROVEMENT GO FOR IT .
Being an audiophile is fun, it's personal and it's expensive .