missioncoonery Eric's return policy is very generous. Especially when evaluated against the industry standards. As a manufacturer, you wouldn't want to expose yourself to customers with no intention to purchase. When you ship something to someone, you want them to have some skin in the game. If you can't afford to risk the cost of return shipping, then you can't afford the speakers in my opinion, and Eric shouldn't have to pass along the cost of your I'll intent of abusing a manufacture's generosity. Is this the best argument you can come up with to fault Eric's product and marketing? Really?
Tekton Double Impact & Comb Filtering
Like many of you, I have been pondering purchasing these speakers but am very curious about the unusual tweeter array. I asked the smartest speaker person that I know (he is a student of Sean Olive) about the design and below is what he had to say.
"In theory it could work, but the driver spacing means that the crossover point would need to be very low.
He is using the SB acoustics tweeter which is 72mm in diameter, center to center on the outside opposing drivers is around 5.7 inches, which is about 2400Hz. This means that combing would stop between 1/4 to 1/2 of the wavelength (between 1200-600Hz) is where the outside tweeters should start playing nice with each other.
Since he is not using low enough crossover points he has created a comb filtering monster. Now while it's not the great point source that was promised, it's no worse than most line arrays and the combing will average itself out given enough listening distance.
The MTM spacing on the other hand is ridiculous. Hopefully he is cutting the top end off on one of those midrange drivers to avoid combing."
"In theory it could work, but the driver spacing means that the crossover point would need to be very low.
He is using the SB acoustics tweeter which is 72mm in diameter, center to center on the outside opposing drivers is around 5.7 inches, which is about 2400Hz. This means that combing would stop between 1/4 to 1/2 of the wavelength (between 1200-600Hz) is where the outside tweeters should start playing nice with each other.
Since he is not using low enough crossover points he has created a comb filtering monster. Now while it's not the great point source that was promised, it's no worse than most line arrays and the combing will average itself out given enough listening distance.
The MTM spacing on the other hand is ridiculous. Hopefully he is cutting the top end off on one of those midrange drivers to avoid combing."
- ...
- 362 posts total
- 362 posts total