Has anyone tried these stunning new CPT power cord?


   Considering the many, many brands of power cords I've tried in my very well accomplished high-end system, I have never been so impacted by these Core Power Technology power cords. Within a very short period(15-20) minutes my system literally came alive. Soundstage opened wider and deeper. The background became dead silent, space between instruments and stage members were more focused and everything sounded cleaner and musical than ever. My highs had a glorious crispness and symbols shimmered. Midrange through my 2" horn became more dynamic and punchy. My 15" bass driver tightened and dug low with great control. My Rel G1 which is a fabulous sub on its own but with a CPT 150 on it is another story. Running high pass from my sub to my Audiozen Noah amplifier, music depth is just stunning. Lower end bass is authoritative and clean with solid grip and impact. 
   My experience with these power cords is truly magical. The scary part of the above is I only have one 150 on my sub and one 300 from my wall to my 6 outlet bar. I still need 3 more to complete my system. I could just imagine the level after that...In closing, I cannot emphasize enough to try one of these in your system. I CANNOT and WIIL NOT take these out as they are that good. But hold your jaw, cuz what you've been listening to will just become real after Core Power Technologies. 

Cheers....and let the tapping begin.......



128x128bacardi
I used cork also per your post! I used 1/4 inch directly under the tranny and over the CLD material. @geoffkait the tranny still buzzes and what are your thoughts about a DC  blocker circuit? 

Instead of tightening the nylon screw tight, I will remove it and see if that helps....
The tranny is the only thing in the chassis. No other circuitry to protect from magnetic fields in these units, unless you think it is degrading the sound to the hard wired power cable on the unit.
@t_ramey 
Here is a link to a bulk buy I made on EBay for a military overrun on dampening material. I had enough to damp several pieces, woofer baskets, equipment rack, and still have extra left over. This stuff is conductive so be careful when using. I used it as the first layer of two in this project. 

http://www.ebay.com/itm/Acoustic-Sound-Absorbing-Dampening-37-3-4-x-7-Adhesive-backing-10-sheets-F04...

I used this as the second and top layer as it is not conductive.  

http://www.soniccraft.com/product_info.php/soundcoat-gp-p-4619?osCsid=a653d4852efb931764789287a9cf1a...


Hi grannyring...

We are all in high movement mode with this being the very last day of our pack out...

Please get in touch with me and of course I will send you a new transformer free of cost...

My pleasure to do so...

Thank You

Mark

1.720.317.9141

or

corepowertech@outlook.com