Room Acoustics

@willemj

Good point about dynamic range. For the same reason a speaker that plays cleanly at 120 dB has just given you 30dB dynamic range over most speakers!

There is not much you can do to get the ambient noise floor much below 40 dB but a speaker with high dynamic range is within reach. They are found as main monitors in studios all over the world.

Some thoughts on what I would try:

Check out ATS Acoustics web site for DIY products. This just as an alternative to GIK (not suggesting better than). 

Find yourself a pair of standmounts that roll-off below 50Hz.

Place speakers on short stands and angle upwards.

Place absorption panels behind speakers, at 1st reflection points on sidewalls, and behind listening position. Panels need not be larger than 2 x 4 feet.

Bass traps in corners. Start with front.

Use wall-to-wall carpet with pad.

Place equipment rack beside listening position, place nothing between speakers.

willemj: "The problem is that the truth is denied by slick salesmen and their gullible victims."

🐏
shadorne
@willemj

+1 Absolutely. When a user reports a problem with their sound and an audible change happening with a change of wire. Instead of the dealer or salesman saying "Hang on, your high end gear is supposed to work properly and reliably with a variety of wires and it should not make a difference." The dealer or salesman turns it into an opportunity "obviously your equipment is so resolving you need to try these $1000 wires" or alternatively if the salesman sold the equipment originally for an astronomical price, "oh this is normal, you need to listen for at least 600 hours to break in"

In some ways this industry is like the way some celebrities are addicted to plastic surgery - constant tweaks until it all ends up in a horrorshow mess and a totally alien lifeless face.

I hate to judge before all the facts are in but it certainly appears somebody’s following the wrong sheep. The weird and dark imagery notwithstanding.

🐏 🐏 🐏 🚶
Preview