2. speakers
  3. 1055522237

Martin Logan Repair and/or Rejuvenation?

I just sold a pair of Martin Logan Sequel II's to a fellow Audiogoner. One of the ESL panels had slipped down about 1/2 inch a long time ago, but did not affect the sound, (at least I did not notice it). I did put that in the ad, and the buyer knew about it.

I shipped the speakers from California to Texas via truck shipping.

When the new owner hooked them up, he noticed that one of the panels (of course, the one that had slipped) sounded a few db lower than the other panel. He said it was really noticable when the panel was run without the woofer hooked up. (The speakers are bi-wired, so this is easily accomplished, although it was something I never did, as I never really noticed it, and neither did my wife or my audiophile friend.) However, I will not call him a liar, as he seems honest, and it is possible, I suppose. (I am not sure how or when this db drop off happened. It might have happened during shipping (he does not think so though), or it may have been a pre-sale condition (This is his hypothesis, I don't think so). Either way, I am willing to help him resolve the problem, including reimbursement of part of the sales price.

My question is this: Have any of you Martin Logan ESL owners ever had this type of problem with a panel?

If so, is there a quick and easy fix or repair?

Or is replacement of the panel the only viable solution to the problem? (This is his solution). I worry that if we replace one panel, that given the age of the speakers (15 years old) that the other panel will then sound different.

I have read/heard of a couple of ideas which range from reasonable to pretty outrageous:
1. Vacuum the panels. I have done this in the past, although it has been years, as general maintenance. (This was originally suggested by a ML tech.)
2. Detach the panels and put them in the shower with warm water running over them to completely clean them.

I know the first idea is reasonable, but does that second solution sound viable? Any help or suggestions would be greatly appreciately by both me and the buyer!
kurt_tank
kenm
4 posts
 
My Quests had to have both their panels replaced from the originals about 3 years ago. This was just a function of time, atmospheric conditions, etc. When I first detected a raspy sound quality, I called ML and the suggestion was made to first eliminate any problem with electronic interfaces. I sent them off to the factory, they were fine, and they also did some upgrading. Cost was not expensive. That narrowed it down to the panels which I replaced. I guess what I'm saying here is that it may be an idea to eliminate a less costly alternative before panel replacement. All that could be lost is the cost of a possible cleaning and upgrade which would be in the buyer's best interests anyway. I would call ML and ask for Jim Powers, the service manager. He is very helpful and is the best source of answers to the questions you raise. Good luck!
Ken
rives
953 posts
 
Might be time for replacement. As Ken said--call and ask for Jim--he's very helpful.
edesilva
768 posts
 
My manual does say something about vaccuuming the panels in situ after unpluggin' them for 24 hours or so.

I'd definitely check w/ML before sticking the panels in the shower. Do not, under any circumstances, use soap, however. The panels are charged and soap (even aerosol detergents) can cause the charge to magically disappear!
devaaudio's avatar
devaaudio
40 posts
 
Hi,

Don't mess around with these speakers. Just call Martin Logan, their service department is very helpful. They can give you assistance and help you diagnose your problem. They have even been known to send out parts to avoid you having to send speakers to them for repair. Hope this helps.
rockinroni's avatar
rockinroni
287 posts
 
I would like to take this opportunity to give Martin Logan their due. This is a fantastic company, I thought I had a problem some years back. I talked to some one at Martin Logan, the dude told me to send him the crossovers.
This was About 6 years after I bought them. Martin Logan replaced both crossovers for FREE even though they did not find anything wrong with the old ones, but it made me Happy!!!!!

I also know that you can up-grade your
Sequel II's to SL3's very reasonably from ML.
This would be a worthwhile upgrade for anyone who has a pair os Sequel II's considering their age.

Mine still work Great,I am the original owner bought them new in 93 from Howard in Ft. Lauderdale. When the time comes I believ I will opt for the SL3 upgrade,new woofers and pannels.
Every 6 months it's a good Idea to unplug them and give them a good vacuum.
More to discover