2. cables
  3. 132597-2647

NEW Cerious Technologies Upgrade - Graphene Matrix Cables

CT Graphene Matrix Cables:

I have been using the CT GE cables for almost two years.
I recently traded up for a full loom of CT Graphene Matrix cables, including speaker, interconnect and PCs, and I wanted to share my experience. I started by replacing only the ICs to try and hear the differences.

The new Matrix interconnects sounded better than the GE immediately after install. I found the original Graphene Extreme ICs to be good but not on the same level as the outstanding GE speaker cables. As break-in started to clear things up, I can hear more clarity and detail not heard before. The ICs are incredible on their own and at the 30 hour mark, I can hear a clear superiority over the GE ICs. I recently started using the Teo Game Changer ICs and preferred them over GE but the Teo has now fallen to the new Graphene Matrix ICs. My Teo’s were and are great, and it is stunning to experience Cerious Technologies commitment to making great technology better.

On the third day of listening to the GM ICs. I couldn’t wait anymore, Having too much fun. I then installed the speaker cables and power cords once I had a pretty good feel for the sound of the GM ICs.

With the full loom of GM cables running in they are going through some strange changes and definitely need time to settle down before realizing what they can really do and very important Bob says to not move them. Since I have a home office I can let them run in all day. I’m at around 120 hours now and they are still improving. Here’s what I’m hearing:

Extended highs and tighter lows.
More detail and better low level listening
Drums are tighter, more clearly defined. So real is the snap of the snare drum. The bass has more depth, seemingly goes deeper, lower. This aspect stands out the most.

I am not in the industry, I’m not an engineer, I don’t work for Cerious Technologies, but I am a fan of the cables and am enjoying what my system is capable of.

I’m closer to my own pinnacle of sound reproduction than ever before.

Lance

lancelock
lancelock OP
1,093 posts
 
@cycles2 ,

I gave the interconnects 3 days before putting in the the SCs and PCs. I can report that there was a significant jump in quality using just the ICs and they weren’t even close to being burned in.

once I introduced the other cables into the system there was no way to tell which Cable was doing more. I have another loom of cables coming for a second system. I will try to be a little more scientific this time and eliminate the variables.


lak's avatar
Ag insider logo xs@2x
lak
4,622 posts
 
@cycles2 

I had a full loom of the CTG cables, I have ordered one Matrix Interconnect, however, I have not received it yet and I have not heard the new Matrix products yet.

With that said, if you are still using the same components as with your CTG Loom, I would think the results with the Matrix line might follow suit.
ozzy's avatar
ozzy
7,453 posts
 
cycles2,

Knowing that the speaker cables would take the longest time to burn in (I’m using tube mono blocks) I tried them first. They look to be mighty impressive in size and construction. They are also the most costly to purchase. 
Once you hear them broken in though you will want to get the interconnects perhaps then adding them one by one.

So, I say get the first major purchase out of the way.

ozzy
audioquest4life
770 posts
 
Reading through this post and I find it interesting that some folks have swapped some pretty expensive cables for these new ones. It seems to me that at the core of these cables, it is a silver core with a braid/wrap which the goal is to eliminate undo interference from external noises. Is this noise composed of EMI/RFI, static, and/or other static related to power induction streams going through a power cord, or a cable closely sitting next to a power cable or other cable subject to hum? 

I have ave been on the cable merry go round as the rest of you, until recently. I am using a solid slver core wire with a PE wrap and WBT pure silver connectors. I  don’t hear any noises, or static, just a three dimensional sound field, as many of you have described with this new cable. 

I just wonder if these cables are addressing external influences of some people’s systems based on their use of unsheilded cables. Does anyone know what the measured capacitance is for these interconnects? Curiosity is getting me, despite having an already great system and soundstage. The million dollar question we are always asking is if their is something better. I guess I might have to try to see. But, if the responses of some of you have indicated, these might be the ticket.

I would also be interested in knowing how these cables sound with vinyl and especially brass and cymbals. I have distinct and clear definition that is palpable right now, I don’t need to change a thing, yeah right😀

you guys are killing me, just when I thought I had it all right for myself. I may be tempted to do a trial. Thanks for making my journey never ending. 
powerglide
27 posts
 
Lancelock,
Are the most delicate, deepest details retained in the same manner with the Matrix loom as the GE loom presents? Is the bass more sophisticated in serving all of the nuances so wonderfully contained through the GE loom?
More to discover