New Tweak --- Its Fantastic


THE NEW TWEAK

Over the good part of this past year I’ve been beta testing a new tweak, the name of which is "Total Contact." Its a hi-bred graphene contact enhancer that is different from all other contact enhancers that have come and gone for one reason or another. I’m not new to these contact enhancers, having had quite a bit of experience with a product developed by the late Brian Kyle and his "Quick Silver" contact enhancer. The "Total Contact" is different ... a LOT different.

"Total Contact" is graphene based and is not a vibration control. It eliminates micro-arching between two contacts. Micro-arching, much like Micro-vibration smears the sound in our stereo systems. Its the type of distortion that we don’t know is there .... until we eliminate it. There is no break-in as we know it. The sound is improved right off the bat, but what you hear is only a smidgen of what’s to come.

I tested three generations of "TC," each of which was an improvement over the previous incarnation. The final mix was cryogenitically treated and made for a more effective, much smoother application. It comes in a large hypodermic needle type plunger containing 1.5 ml of product and includes a instructional DVD and an application brush.

The application should be applied with a very thin coat to all of your electrical connections .... from your cartridge pins to your power cords. I did my entire system, including the ends of my fuses.

Upon initial application, you will notice an improvement in clarity, correctness of tonal balance and a more overall organic sound. But ... that is just scratching the surface of what this magic paste does. As it cures, the improvements become more apparent. Much more!

There are two real break-through events that happen almost to the day with "Total Contact," one at four weeks and another at eight weeks . At four weeks, you’ll get a real jump in clarity and overall improvement. That’s only a taste though of what’s to come at eight weeks. At eight weeks your system’s focus will make a jump in SQ that is so real - its surreal.

After 40 years in the hobby, and a total tweak nut, I have never heard anything that does what this graphene paste does. The see-through clarity at eight weeks becomes simply amazing. The "paste" eventually cures into a kind of polymer plastic and it seems that the sound improves with each listening session. So, its important that you leave your contacts alone for the duration. If you’re the type of person that continually switches wires in and out, you’ll have to re paste until enough time has elapsed to get "the cure."

The only problem I had was with the first batch and that had to do with shorting out a tube pin in the line stage. Use the "TC" very sparingly on tube pins, if at all. I only had problems with the line stage tube pins. The Amp, CD Player and Phono Stage has had no tube pin problems at all.

Tim Mrock, one of our fellow A’goners, is the developer of the product. Its taken Tim 15 years and several patents to get it right. Tim has "pasted" every electrical contact he can find in his audio system, all of the switches in his circuit breaker box, every contact in his car ... and has used it in commercial applications such as hospital circuit breakers, surgical lights ... and other places where efficiency and long life of electrical components are deemed important.

This product is highly recommended to anyone who truly wants to get the most out of his/her audio systems. There’s enough product in each tube to do at least two audio systems as it just takes a very thin coat on each application to be effective. The last tube was enough to do my system twice and then a friend’s system this past weekend.


Frank

PS: There were a couple of other A’goner beta testers of this product as well. Hopefully, they will chime in here with their experiences for comparison. I "pasted" both of Steve Fleschler’s systems a few days ago, perhaps he will comment on his results too. We forgot to paste Steve’s power cords though, so there’s a lot more to be had from Steve’s two fantastic systems.

Frank
128x128oregonpapa
I'm getting a real kick out of this thread (kind of sick that way). I'll give oregonpapa a lot of credit for taking the abuse he has (from the apparently well educated) so graciously. I'll hold off on buying this product until some more pioneers (non-engineers I suspect) try it & weigh in. 

thecarpashian " there MUST be a scientifically verifiable explanation and data as to why"... You would think so but apparently science has not in all cases caught up to our little hobby yet. Case in point / Aftermarket high quality Power cords & IC's make an audible improvement in sound quality. I've been told this simply can't be true because it can't be scientifically measured. My ears (& many others) strongly disagree. 
Can anyone rationally explain  Shakti Hallographs or any number of small tuning devises from Harmonix, SR and the like? I can't but I believe in the reports of a large number of reputable people who say they use them and can hear a difference. And I do think there are scientific explanations for how they work even if I can't quite put my finger on it. Just like break in time on my tubed audio equipment. It should not exist, but it does and it is not my imagination that my system sounds better after about 1/2 hour, it's my ears.
Frank is not a shill. Graphene is being used in loudspeaker drivers  by Magico and cables by Bob Grost. There may be some merit to that use. There may also be some merit to nanoparticles in a paste form that cause a better connection between things that I use deoxIT to clean.
I will probably pass on it because I'd rather keep the connections clean than put a substance between them to aid in conductivity. But I would not criticize anyone who thinks it may help with the sound of their system. If enough people rave, I might even give it a try myself. I love to hear about new tweaks that are not completely devoid of any potential scientific explanation. In this case, I am hard pressed to understand the criticism. 
 

oregonpapa OP wrote,

“There is a simple solution to relieve the fears of the Nay-Sayers ... don’t buy the product. Stay home. Let other’s make their own decisions .... and you go about your destructive activities elsewhere.

The free market will decide if Total Contact will be successful or not. For those who DO make the jump, they will find that all of the "hype" was the truth. Their positive experiences will be posted here and on other forums. Word of mouth will cause others to buy the product and success will be attained. That, of course, depends upon whether the consumers feel they got good results for the money spent, or even far surpassing the money spent. Conversely, if the product is bunk, it will fall out of favor (Tice Clock) and will be unsuccessful.”

>>>>>I hate judge before all the facts are in but it looks like Papa San is just a wolf in sheep’s clothing. 🐑 This is the oldest tweak marketing ploy on the books - Promote the bejessus out of the tweak you’re hawking and disparage all other competing tweaks, you know, like Quicksilver Gold and the Tice Clock. Frank, didn’t you get the memo that the Tice Clock works?! Hel-loo! I know what you’re thinking, but I read it on an audio forum. 😛 It was just all-thumbs audiophiles who gave it a bad rap.

Besides, the closets of audiophiles are filled with tweaks of yore that got replaced or got thumbs down. But that doesn’t mean the discarded tweaks don’t work. The Green Pen, VPI Brick, Shakti Stone, PWB silver rainbow foil, crystals, CD beveler, Mpingo disc. What have you. Audiophiles are a fickle group, always looking for the next bandwagon to jump on. Chasing the Dragon. 🦎 Looking for Audio Nirvana. 😛 Contact enhancers and aftermarket fuses are controversial tweaks, so Papa San should probably reconsider embracing the Tice Clock rather than disparaging it. We all hang together or we hang separately. 😬

In order to debunk something it must be bunk to begin with. - Old audiophile saw

It’s getting harder and harder to tell the naysayers from the believers without a scorecard.

What is the market for contact enhancers? Gotta be at least fifty.


In 1991 the US military used graphite dust particles as a cloaking material to reduce the detection of our invasion or a specific aspect. A similar dust particle was attached to a novel carrier system that was delivered by stealth aircraft to disrupt or destroy both the power grid and communications systems. This was documented in Iraq and Kosovo.

Two reasons graphite was and is used by the defense industry is because of its electromagnetic properties and it’s superior electrical conduction properties.

Now move 30 years forward we have nearly the same particle reapplied by companies such as Tesla in the making of batteries and the parent company of Clarity Cap in the making of Super Caps for electric vehicles. Super caps are soon to be used in audio. Again these materials have both superior conductive and shielding properties. There is a growing list of uses for graphite and now graphene for industrial and consumer use. Tim Mrock has added to that list with Total Contact. Tom