Binding Post Jumpers - New Product!!!

The banana plugs. I am going to add them to the wiring harness going from the outboard crossovers to my Living Voice speakers.  I use a Duelund bare wire right now. 

@grannyring I'll be interested in reading your thoughts after the break-in process ;-)!

 A pal of mine who makes IC's, as well as Don Sachs, the guy who made my preamp, both are big fans of Dueland wire.  Don now uses it for the internal wiring in his preamp and rewired his speakers with Dueland wire, a definite improvement from his Supra Ply 3.4 wire he previously used.  Both cables are similar in metal construction, but Don clearly prefers the Dueland wire.   I use vintage WE 16 ga. wire for my bedroom system, which is quite similar in all aspect of construction to the Dueland wire, and it is betters far more expensive speaker cables I have used in the past.  It has a "organic" sound -- clean and clear, such as KLE connectors evidently have.

With KLE connectors, Dueland wiring may be a very economical upgrade for ones' system, for jumpers, IC's or speakers wire.   

Whitestix, I agree with you regarding the Duelund and Western Electric wire. Grannyring originally made the suggestion to me and I'm happy.
Duelund tinned - copper in cotton oil impregnated wire. 16 gauge going to my top speaker terminals and 12 gauge going to my lower speaker terminals. Terminated with the KLE Bananas.
Also a pair of speaker cables made with the Heavy Duty Western Electric 10 gauge wire.

FYI - The signal conductors of my speaker cables is currently....

https://www.takefiveaudio.com/products/334-mil-spec-16-awg-silver-plated-copper-wire-green-cryo-trea...

The neutral is...
https://www.takefiveaudio.com/products/1683-belden-9497-cryo-treated/

The cables resolve to a very high degree and provide exceptional dynamic performance, with a deep controlled bass, exceptional clarity and a spacious 3D image.

However, most of their superb abilities is actually due to the Helix geometry.

Adopting a more conventional geometry where signal and neutral conductors run side by side will probably not yield close to the same results.

I did look at Duelund wire, but the fact it is "tinned", which is not as conductive as silver plate, put me off

The Beldon Mil Spec 16 AWG Silver Plated Copper wire is a little more economical than the tinned Duelund and even more economical than the Silver plated Duelund version.

Note: I have found through a lot of experimentation...
- that the neutral can be constructed from a little lower quality conductor without degrading performance.
- PROVIDED:  it is at least twice the gauge of the signal conductor 

But again, that is using the Helix geometry - I cannot comment on how that design approach might impact conventional geometries, but I have read that it will provide some noticeable improvements.

Personally - I don’t think there is much difference between the Beldon or the Duelund conductors from a sound quality perspective. Both will provide very good sound quality

Regards - Steve