Thanks again for your valued input, guys. Just an update on my progress after re-calibration of the Pro-ject Carbon SB/Ortofon Red combo...
The VTA was rechecked and is as close to perfect as possible, azmuth is also 5x5, as is the stylus angle. The table balance was checked with a precision Starrett bubble level throughout the tonearm arc and it couldn't be better. The only tweak required was a very minor (less than a 10%) correction to the cartridge alignment using a Baerwald 66/120.89 scale.
I'm incomplete agreement with everyone that says that once the table is properly set up the cartridge is the core of the vinyl playback system. I've run both Supex and Dynavector MC's in my old AR EB101/SME with astonishing results, Signet, Ortofon and Talisman in my old Systemdek, and A/T and Sumiko BPS in my Music Hall MMF 5.1 and been quite satisfied with them.
I also agree that most of the new cartridges are not as musical as the older ones. However, time and engineering have raised the peformance of lower price turntables to an acceptable level and a good foundation for hot-rodding. My immediate project is to experiment with vibration isolation with cones and pods, althought the 25 lbs of granite the T'table is resting on isn't likely to yield to much. My next step is to swap out the cartridge with a conservatively priced (less than $350) unit, based on what I hear (and don't hear) then fine tune the system with a complimentary cable upgrade and probably an outboard phono preamp down the road. My life's priorities are changing. Being retired and more fiscally practical than in days of yore, dropping 3 Grand on a turntable isn't as enticing as it once was. Besides, my grandaughter is about to enter college and I've got my eye on a new set of Titleist irons and spring is just around the corner.
As to the performance of my Musical Fidelity A3.2...It's fair to say it's more laid back and tubelike in a Conrad Johnson sort of way but I like to listen to music in the manner of Deutche Grammophons' 15th row-center stage playback, but the amp's got buckets of power and could produce blinding sound pressure through my old KEF 104/2s and Mirage sub system. When I would crank up a live rock and roll concert the neighbors ran to their air raid shelters because their sidewalks started buckling. As we used to say back in Detroit..."There is no such thing as too much horsepower..".
The VTA was rechecked and is as close to perfect as possible, azmuth is also 5x5, as is the stylus angle. The table balance was checked with a precision Starrett bubble level throughout the tonearm arc and it couldn't be better. The only tweak required was a very minor (less than a 10%) correction to the cartridge alignment using a Baerwald 66/120.89 scale.
I'm incomplete agreement with everyone that says that once the table is properly set up the cartridge is the core of the vinyl playback system. I've run both Supex and Dynavector MC's in my old AR EB101/SME with astonishing results, Signet, Ortofon and Talisman in my old Systemdek, and A/T and Sumiko BPS in my Music Hall MMF 5.1 and been quite satisfied with them.
I also agree that most of the new cartridges are not as musical as the older ones. However, time and engineering have raised the peformance of lower price turntables to an acceptable level and a good foundation for hot-rodding. My immediate project is to experiment with vibration isolation with cones and pods, althought the 25 lbs of granite the T'table is resting on isn't likely to yield to much. My next step is to swap out the cartridge with a conservatively priced (less than $350) unit, based on what I hear (and don't hear) then fine tune the system with a complimentary cable upgrade and probably an outboard phono preamp down the road. My life's priorities are changing. Being retired and more fiscally practical than in days of yore, dropping 3 Grand on a turntable isn't as enticing as it once was. Besides, my grandaughter is about to enter college and I've got my eye on a new set of Titleist irons and spring is just around the corner.
As to the performance of my Musical Fidelity A3.2...It's fair to say it's more laid back and tubelike in a Conrad Johnson sort of way but I like to listen to music in the manner of Deutche Grammophons' 15th row-center stage playback, but the amp's got buckets of power and could produce blinding sound pressure through my old KEF 104/2s and Mirage sub system. When I would crank up a live rock and roll concert the neighbors ran to their air raid shelters because their sidewalks started buckling. As we used to say back in Detroit..."There is no such thing as too much horsepower..".