Thumbs up for ultrasonic record cleaning


My Cleaner Vinyl ultrasonic record cleaner arrived today and it’s impressive.

Everything I’d read indicated that ultrasonic was the way to go, and now I count myself among the believers. Everything is better - records are quieter, less ticks and pops, more detail etc.

All my records had been previously cleaned with a vacuum record cleaner and were well cared for. Nonetheless, the difference is obvious and overwhelmingly positive.

Phil
phil0618
@terry9,

I was thinking about your multi-stage filtering system/rinsing efforts...

Did you gradually work up to this? If so, could you ascribe a % of improvement, say on something like I'm currently utilizing compared to a more comprehensive approach like you are using? I realize these things are somewhat subjective but I assume you have valid reasons for your way. Thanks.
Heads up on temperature / thermometer readings.
As mentioned previously the temperature gauges on my USD units or incorrect - off by 5c - 10c - on the low side. So actual temp may be 45c but the temp gauge on the US unit will read 35c.

I previously recommended a digital thermometer from Risepro. $7 from Amazon and seems accurate. HOWEVER. When the US tank is running these thermometers (I’ve got 2) can read 5c - 10c higher than actual temp. It is dramatic. You turn on the tank and the indicated temp on the thermometer will jump up almost immediately. Turn off the tank and the indicated temp will fall back down to actual.  Also note that the behavior is more muted when you have albums in the tank - the temp will jump up less dramatically - which seems to speak to the issue of the albums actually dampening the US action and why you should consider cleaning only a  few records at a time. I'm actually cleaning only 3 records at a time, down from my original 6.

So...
If you use a digital thermometer be sure to test it with the tank on and off to observe any potential differences.

Consider a non-digital thermometer? I don’t have one to test, but guessing it may not be susceptible to the same interference.