@simao TBD I opened the barrel of the connector and inside there was epoxy or glue or something. I took it to my local hifi shop confirmed it wasn't passing a signal but their tech wasn't there so I left it with them. Also fired off an email to the US importer it's from Jorma Design pretty sure they're in Belgium. I bought it used not at the shop i took it.
Classic Over-reaction!
So today I was listening to a new vintage LP that had just arrived. And when I switched cables from my phono stage to my Hegel 160 integrated - just to note sonic differences between cables -- I noticed that all of a sudden - for the first time - a noticeable hum was emanating from the Hegel’s transformer.
Crap. What now?
I switched back to the original cables. Nothing. The hum was still there.
I tried different tubes in the phono stage. Nothing. The hum was still there.
I unplugged the Hegel from the wall outlet and plugged it into the power strip. Nothing. The hum was still there. I switched everything off in despair and moped upstairs for dinner.
Where I noticed the toaster oven was on. Hmmm. A few minutes later the toaster oven dinged and turned off and I went downstairs, turned the Hegel on, and the hum was gone.
Sigh....
Crap. What now?
I switched back to the original cables. Nothing. The hum was still there.
I tried different tubes in the phono stage. Nothing. The hum was still there.
I unplugged the Hegel from the wall outlet and plugged it into the power strip. Nothing. The hum was still there. I switched everything off in despair and moped upstairs for dinner.
Where I noticed the toaster oven was on. Hmmm. A few minutes later the toaster oven dinged and turned off and I went downstairs, turned the Hegel on, and the hum was gone.
Sigh....
- ...
- 31 posts total
- 31 posts total